P1202 Audi Code - Fuel Injector Circuit Cylinder 2 Electrical Malfunction
Quick Answer
P1202 Audi indicates Fuel Injector Circuit Cylinder 2 Electrical Malfunction. Common causes include Faulty Fuel Injector #2, Fuel Injector #2 harness is open or shorted, Fuel Injector #2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1202 Audi indicates Fuel Injector Circuit Cylinder 2 Electrical Malfunction.
- Common causes
- Common causes include Faulty Fuel Injector #2, Fuel Injector #2 harness is open or shorted, Fuel Injector #2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1202 Audi Description
What are the Possible Causes of the DTC P1202 Audi?
- Faulty Fuel Injector #2
- Fuel Injector #2 harness is open or shorted
- Fuel Injector #2 circuit poor electrical connection
How to Fix the DTC P1202 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1202 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1202 Audi code?
Need more information on how to fix the P1202 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1202 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1202 Audi Code
What does the OBDII code P1202 mean for an Audi?
P1202 indicates an electrical malfunction in the fuel injector circuit for cylinder 2, which can affect engine performance.
What are the common symptoms of the P1202 code?
Symptoms include rough idling, engine misfires, reduced fuel efficiency, and possibly a check engine light.
What causes the P1202 code on an Audi?
Common causes include a faulty fuel injector, damaged wiring or connectors, issues with the engine control module (ECM), or insufficient voltage to the injector.
Can a dirty fuel injector trigger the P1202 code?
No, a dirty injector usually causes flow-related issues, while P1202 is specific to an electrical malfunction in the injector circuit.
How can I diagnose the P1202 code?
Start by inspecting the wiring and connectors for cylinder 2's fuel injector, test the injector for electrical continuity, and check for ECM-related issues.
Can I drive my Audi with the P1202 code?
Driving with this code is not recommended, as it can cause further damage to the engine and impair performance.
How do I fix the P1202 code on an Audi?
Repairs may involve replacing the fuel injector for cylinder 2, repairing damaged wiring, or addressing ECM issues.
Can a bad ECM cause the P1202 code?
Yes, if the ECM fails to properly control the injector circuit, it can trigger this code.
How much does it cost to repair the P1202 code?
The cost depends on the issue. Replacing a fuel injector typically ranges from $100-$300, while wiring repairs or ECM replacements may cost more.
Will clearing the P1202 code fix the problem?
Clearing the code may temporarily turn off the check engine light, but the underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1202 Audi OBDII Code
Code P1202 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
