P1201 Code - Fuel System Failure Caused No. 1 Cylinder Misfire
Quick Answer
The Engine Control Module (ECM) monitors the Fuel System. Common causes include Ignition spark, Check primary and secondary ignition, Check fuel system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1201 indicates Fuel System Failure Caused No. 1 Cylinder Misfire.
- Common causes
- Common causes include Ignition spark, Check primary and secondary ignition, Check fuel system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1201 Description
What are the Possible Causes of the DTC P1201?
- Ignition spark
- Check primary and secondary ignition
- Check fuel system
- Fuel pressure and injector
- Check for vacuum leaks
- Check engine mechanical condition
How to Fix the DTC P1201?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1201 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1201 code?
Need more information on how to fix the P1201 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1201 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1201 Acura — Fuel System Failure Caused No. 1 Cylinder Misfire
- P1201 Audi — Fuel Injector Circuit Cylinder 1 Electrical Malfunction
- P1201 Buick — Transmission Range Redundant Command Message Counter Incorrect
- P1201 Cadillac — Transmission Range Redundant Command Message Counter Incorrect
- P1201 Chevrolet — Transmission Range Redundant Command Message Counter Incorrect
- P1201 GMC — Transmission Range Redundant Command Message Counter Incorrect
- P1201 Honda — Fuel System Failure Caused No. 1 Cylinder Misfire
- P1201 Isuzu — Injector Circuit Open / Shorted Cylinder #1
- P1201 Jaguar — Fuel Injector Circuit Cylinder 1 Electrical Malfunction
- P1201 Volkswagen — Fuel Injector Circuit Cylinder 1 Electrical Malfunction
Frequently Asked Questions about P1201 Code
1. What are common symptoms of OBDII code P1201 related to fuel system failure causing a No. 1 cylinder misfire?
The common symptoms include rough idling, engine misfires, loss of power, and potentially poor fuel efficiency.
2. What are the possible causes of OBDII code P1201 indicating a No. 1 cylinder misfire due to fuel system failure?
Potential causes may include a faulty fuel injector, clogged fuel filter, fuel pump issues, vacuum leaks, or problems with the fuel pressure regulator.
3. How can I diagnose the root cause of OBDII code P1201 associated with fuel system failure leading to a No. 1 cylinder misfire?
Diagnosing this issue typically involves conducting a thorough inspection of the fuel system components, checking fuel pressure, examining the fuel injector operation, and scanning for any vacuum leaks.
4. Can a DIY enthusiast repair OBDII code P1201 caused by fuel system failure and No. 1 cylinder misfire?
While some basic checks like inspecting for loose connections or replacing a fuel filter can be done by DIYers, diagnosing and repairing complex issues like a faulty fuel injector may require professional help.
5. Is it safe to continue driving with OBDII code P1201 related to fuel system failure and a No. 1 cylinder misfire?
Continuing to drive with this issue can potentially cause further damage to the engine and catalytic converter, so it is recommended to address the problem promptly.
6. Are there any specific maintenance tips to prevent OBDII code P1201 from occurring due to fuel system issues?
Regularly servicing the fuel system, using high-quality fuel, and promptly addressing any signs of engine trouble can help prevent the occurrence of this error code.
7. Can a malfunctioning oxygen sensor trigger OBDII code P1201 indicating a No. 1 cylinder misfire caused by fuel system problems?
Yes, a faulty oxygen sensor can disrupt the air-fuel mixture, potentially leading to misfires in the No. 1 cylinder and triggering the P1201 code related to fuel system issues.
8. How important is it to address OBDII code P1201 promptly when it relates to fuel system failure and No. 1 cylinder misfire?
Promptly addressing this code is crucial to prevent further damage to the engine, ensure optimal performance, and maintain fuel efficiency.
9. Will resetting the OBDII system clear the P1201 code associated with fuel system issues and a No. 1 cylinder misfire?
Resetting the system may temporarily clear the code, but if the underlying issue causing the misfire is not resolved, the code is likely to reappear after driving the vehicle.
10. Can a dirty or clogged fuel injector lead to the occurrence of OBDII code P1201 indicating fuel system failure causing a No. 1 cylinder misfire?
Yes, a dirty or clogged fuel injector can disrupt the proper fuel delivery to the No. 1 cylinder, resulting in misfires and triggering the P1201 error code related to fuel system issues.
Discuss the causes and fixes for P1201 OBDII Code
Code P1201 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
