P1195 Mazda Code - BARO Sensor Circuit
Quick Answer
P1195 Mazda indicates BARO Sensor Circuit. Common causes include Faulty BARO Sensor, Faulty MAP Sensor, BARO Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1195 Mazda indicates BARO Sensor Circuit.
- Common causes
- Common causes include Faulty BARO Sensor, Faulty MAP Sensor, BARO Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1195 Mazda Description
What are the Possible Causes of the DTC P1195 Mazda?
- Faulty BARO Sensor
- Faulty MAP Sensor
- BARO Sensor harness is open or shorted
- BARO Sensor circuit poor electrical connection
How to Fix the DTC P1195 Mazda?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1195 Mazda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1195 Mazda code?
Need more information on how to fix the P1195 Mazda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1195 Mazda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1195 Mazda Code
1. What does the OBDII code P1195 mean for a Mazda?
P1195 indicates a fault in the BARO (barometric pressure) sensor circuit, which monitors atmospheric pressure to optimize engine performance.
2. What are the common symptoms of code P1195 in a Mazda?
Symptoms may include poor engine performance, rough idling, reduced fuel efficiency, and the Check Engine Light turning on.
3. What causes the P1195 code to appear on a Mazda?
Common causes include a faulty BARO sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. Can I drive my Mazda with a P1195 code?
While the car may still be drivable, continued operation can lead to poor engine performance and potential damage. It's best to address the issue promptly.
5. How do I diagnose the P1195 code on a Mazda?
Diagnosis involves checking the BARO sensor for proper operation, inspecting the wiring and connectors for damage, and testing the ECM for potential faults.
6. How is the P1195 code fixed on a Mazda?
Repairs may include replacing the BARO sensor, repairing or replacing damaged wiring, or updating/replacing the ECM if necessary.
7. Where is the BARO sensor located in a Mazda?
The BARO sensor is typically integrated into the engine control module (ECM) or mounted near the intake manifold, depending on the model.
8. How much does it cost to fix the P1195 code on a Mazda?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor, wiring, or ECM needs replacement.
9. Can a dirty air filter cause the P1195 code in a Mazda?
No, a dirty air filter does not directly cause this code, but it can contribute to poor engine performance and should be checked as part of regular maintenance.
10. Will clearing the P1195 code fix the problem in a Mazda?
Clearing the code will reset the Check Engine Light temporarily, but the underlying issue must be fixed to prevent the code from returning.
Discuss the causes and fixes for P1195 Mazda OBDII Code
Code P1195 Mazda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
