AutoCodes – Chevrolet – P1192 2016 Chevrolet Silverado

P1192 2016 Chevrolet Silverado Code - O2 Low Reference Circuit (NOx Sensor 1)

Quick Answer

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1192 2016 Chevrolet Silverado indicates O2 Low Reference Circuit (NOx Sensor 1).
Common causes
Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 279
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Mar 24, 2024
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1192 2016 Chevrolet Silverado Description

The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. There are two NOx sensors, one placed upstream of selective catalytic reduction, to measure inlet NOx concentration, and one placed downstream. They are connected with the control module via CAN and all the information is exchanged through it. Since it is a smart sensor, all the electrical monitoring is performed inside the sensor and only the results are sent to the Engine Control Module (ECM). Each NOx sensor contains a sensing cell, a pumping cell, and a heater. A sample of exhaust gas passes through a diffusion gap between the sensing cell and the pumping cell. The NOx sensor maintains a constant reference voltage across the sensing cell. An electronic circuit within the sensor controls the pump current through the pumping cell in order to maintain a constant voltage in the sensing cell. The amount of current required to maintain the reference voltage in the sensing cell is proportional to the concentration of NOx in the exhaust. The ECM varies the amount of diesel exhaust fluid (reductant) added by varying the reductant injector duty cycle in response to changes in engine exhaust NOx levels. The smart NOx sensors consist of two components, the NOx module and the NOx sensor element that are serviced as a unit. A circuit or performance condition with a NOx sensor is detected by the NOx sensor module. The smart NOx sensor module communicates the condition to the ECM over the serial data line. The ECM sets a DTC when a serial data message is received from the NOx sensor module. The Diagnostic Trouble Code (DTC) will be set if the ECM software detects a fault in the NOx sensor circuitry or a performance fault in the NOx sensor for greater than 2 s.
OBDII Code P1192 2016 Chevrolet Silverado - O2 Low Reference Circuit (NOx Sensor 1) - AutoCodes.com
P1192 2016 Chevrolet Silverado Code - O2 Low Reference Circuit (NOx Sensor 1)

What are the Possible Causes of the DTC P1192 2016 Chevrolet Silverado?

  • Faulty Nitrogen Oxides (NOx) Sensor
  • Nitrogen Oxides Sensor harness is open or shorted
  • Nitrogen Oxides Sensor circuit poor electrical connection

How to Fix the DTC P1192 2016 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1192 2016 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1192 2016 Chevrolet Silverado code?

Need more information on how to fix the P1192 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1192 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1192 2016 Chevrolet Silverado Code

1. What does the OBDII code P1192 mean on a 2016 Chevrolet Silverado?

P1192 refers to "O2 Low Reference Circuit (NOx Sensor 1)," indicating an issue with the low reference circuit of the NOx sensor.

2. What are the common symptoms of a P1192 code in a 2016 Chevrolet Silverado?

Symptoms may include the check engine light turning on, reduced fuel efficiency, poor engine performance, and possible emissions test failure.

3. What causes the P1192 code to appear on a 2016 Chevrolet Silverado?

Common causes include a faulty NOx sensor, damaged or corroded wiring in the low reference circuit, a loose or disconnected sensor connector, or a malfunctioning engine control module (ECM).

4. Can I drive my 2016 Chevrolet Silverado with a P1192 code?

While the truck may still be drivable, prolonged operation with this code could lead to increased emissions, reduced fuel efficiency, and potential damage to the catalytic converter.

5. How do I diagnose a P1192 code on a 2016 Chevrolet Silverado?

Diagnosis involves using an OBDII scanner, visually inspecting the NOx sensor and its wiring, checking for proper grounding, and testing the low reference circuit for continuity.

6. How do I fix the P1192 code on my 2016 Chevrolet Silverado?

Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring, securing loose connections, or reprogramming/updating the ECM if needed.

7. What is the role of the NOx sensor in a 2016 Chevrolet Silverado?

The NOx sensor monitors nitrogen oxide levels in the exhaust to help the ECM manage emissions and maintain optimal engine performance.

8. How much does it cost to fix a P1192 code on a 2016 Chevrolet Silverado?

Repair costs can range from $200 to $600, depending on whether the issue is a sensor replacement, wiring repair, or ECM update.

9. Can a dirty or clogged exhaust system cause the P1192 code on a 2016 Chevrolet Silverado?

While a dirty exhaust system is not a direct cause, it can contribute to sensor malfunctions or readings that trigger the code.

10. Is a P1192 code common in 2016 Chevrolet Silverado trucks?

This code is not extremely common but can occur due to wear and tear on the NOx sensor or its wiring over time.

Discuss the causes and fixes for P1192 2016 Chevrolet Silverado OBDII Code

Code P1192 2016 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play