P1189 BMW Code - Fuel Control Bank 2 Sensor 1
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1189 BMW indicates Fuel Control Bank 2 Sensor 1.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1189 BMW Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
What are the Possible Causes of the DTC P1189 BMW?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P1189 BMW?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1189 BMW code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1189 BMW code?
Need more information on how to fix the P1189 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1189 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1189 BMW Code
1. What does the OBDII code P1189 mean on a BMW?
P1189 indicates a fuel control issue related to Bank 2 Sensor 1, which is the upstream oxygen sensor on the second bank of the engine.
2. What are the common symptoms of code P1189 on a BMW?
Symptoms may include poor fuel economy, rough idling, engine hesitation, reduced engine performance, and illuminated Check Engine Light.
3. What causes code P1189 on a BMW?
Common causes include a faulty oxygen sensor, wiring issues, vacuum leaks, fuel injector problems, or a malfunctioning Mass Airflow (MAF) sensor.
4. How can a faulty oxygen sensor trigger code P1189?
If the Bank 2 Sensor 1 oxygen sensor fails or provides inaccurate readings, it can disrupt the air-fuel mixture balance, causing the code.
5. Can code P1189 be caused by a vacuum leak?
Yes, a vacuum leak can result in unmetered air entering the engine, affecting fuel control and triggering the P1189 code.
6. How do you diagnose code P1189 on a BMW?
Use an OBDII scanner to confirm the code, inspect the oxygen sensor and wiring, check for vacuum leaks, test the fuel injectors, and examine the MAF sensor.
7. Is it safe to drive a BMW with code P1189?
Driving with this code is not recommended, as it can lead to poor engine performance and potentially cause damage to other components over time.
8. How do you fix code P1189 on a BMW?
Repairs can include replacing the faulty oxygen sensor, fixing wiring issues, addressing vacuum leaks, cleaning or replacing the MAF sensor, or servicing the fuel injectors.
9. How much does it cost to fix code P1189 on a BMW?
Repair costs vary depending on the issue but typically range from $150 to $400 for parts and labor, with oxygen sensor replacement being the most common fix.
10. Can a dirty Mass Airflow (MAF) sensor cause code P1189 on a BMW?
Yes, a dirty or faulty MAF sensor can send incorrect air intake readings to the ECU, disrupting fuel control and triggering the code.
Discuss the causes and fixes for P1189 BMW OBDII Code
Code P1189 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
