P1170 Code - HO2S-11 No Change Detected
Quick Answer
P1170 indicates HO2S-11 No Change Detected. Common causes include Faulty HO2S-11 Sensor, HO2S-11 Sensor harness is open or shorted, HO2S-11 Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1170 indicates HO2S-11 No Change Detected.
- Common causes
- Common causes include Faulty HO2S-11 Sensor, HO2S-11 Sensor harness is open or shorted, HO2S-11 Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1170 Description
What are the Possible Causes of the DTC P1170?
- Faulty HO2S-11 Sensor
- HO2S-11 Sensor harness is open or shorted
- HO2S-11 Sensor circuit poor electrical connection
How to Fix the DTC P1170?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1170 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1170 code?
Need more information on how to fix the P1170 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1170 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1170 Buick — Bank To Bank Fuel Trim Offset
- P1170 Cadillac — Bank To Bank Fuel Trim Offset
- P1170 Chevrolet — Bank To Bank Fuel TrimOffset
- P1170 Ford — Engine Shut Off Solenoid Fault
- P1170 GMC — Bank To Bank Fuel TrimOffset
- P1170 Hyundai — ECM Barometric Pressure Sensor
- P1170 KIA — Front Heated Oxygen Sensor Stuck
- P1170 Land Rover — LH Bank Front HO2S Signal Fuel Trim Malfunction
- P1170 Lexus — Port Injector Fuel Performance
- P1170 Mazda — HO2S-11 No Change Detected
- P1170 Toyota — Port Injector Fuel Performance
Frequently Asked Questions about P1170 Code
1. What are the common symptoms of OBDII code P1170 (HO2S-11 No Change Detected)?
- Common symptoms include decreased fuel efficiency, rough idling, loss of power, and the illumination of the check engine light.
2. What are the potential causes of OBDII code P1170?
- Possible causes include a faulty oxygen sensor, wiring issues, exhaust leaks, vacuum leaks, or issues with the fuel system.
3. How can I diagnose the underlying issue causing OBDII code P1170?
- Diagnosing the issue may involve checking the oxygen sensor's voltage output, inspecting the sensor's wiring for damage, and performing a thorough inspection of the exhaust system for leaks.
4. Can a dirty or contaminated oxygen sensor trigger code P1170?
- Yes, a dirty or contaminated oxygen sensor may lead to inaccurate readings and trigger code P1170. Regular maintenance and cleaning of the sensor can help prevent this issue.
5. Is it safe to continue driving with OBDII code P1170 present?
- It is generally not recommended to continue driving with this code present, as it can lead to decreased engine performance and potential long-term damage if left unresolved.
6. How can I repair OBDII code P1170 at home?
- DIY repair options may include cleaning or replacing the oxygen sensor, checking and repairing any damaged wiring, and addressing any exhaust leaks. However, professional diagnosis and repair may be necessary for more complex issues.
7. Will resetting the OBDII code P1170 eliminate the underlying problem?
- Simply resetting the code without addressing the root cause will not fix the issue. It is essential to diagnose and resolve the underlying problem to prevent the code from reoccurring.
8. Can a malfunctioning catalytic converter trigger OBDII code P1170?
- Yes, a malfunctioning catalytic converter can affect the oxygen sensor readings and trigger code P1170. It is essential to inspect the converter as part of the diagnostic process.
9. How long does it take to repair OBDII code P1170?
- The repair time can vary depending on the exact cause of the code. Simple fixes like replacing a sensor or repairing wiring may take a few hours, while more complex issues could require more time and professional expertise.
10. What should I do if OBDII code P1170 persists after attempted repairs?
- If the code persists after attempted repairs, it may be necessary to seek assistance from a qualified mechanic or technician to conduct a thorough diagnosis and address any underlying issues that may have been overlooked.
Discuss the causes and fixes for P1170 OBDII Code
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
