AutoCodesNissan – P1168 Nissan

P1168 Nissan Code - Closed Loop Control Function Bank 2

Quick Answer

The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range. Common causes include For Models 2005 and up:, Faulty Air Fuel Ratio Sensor 1 Bank 2, Air Fuel Ratio Sensor 1 Bank 2 harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1168 Nissan indicates Closed Loop Control Function Bank 2.
Common causes
Common causes include For Models 2005 and up:, Faulty Air Fuel Ratio Sensor 1 Bank 2, Air Fuel Ratio Sensor 1 Bank 2 harness is open or shorted.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 229,663
How popular is this code, among other codes? High
Table of contents Created and updated by William Orellana on Jul 02, 2021
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1168 Nissan Description

The Engine Control Module (ECM) performs ON/OFF duty control of the Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 heater corresponding to the engine operating condition to keep the temperature of Air Fuel Ratio (A/F)/Heated Oxygen Sensor 1 element at the specified range. The Diagnostic Trouble Code (DTC) will set when the closed-loop control function for bank 1 does not operate even when the vehicle is driving in the specified condition, the closed-loop control function for bank 2 does not operate even when the vehicle is driving in the specified condition.
OBDII Code P1168 Nissan - Closed Loop Control Function Bank 2 - AutoCodes.com
P1168 Nissan Code - Closed Loop Control Function Bank 2

What are the Possible Causes of the DTC P1168 Nissan?

    For Models 2005 and up:
  • Faulty Air Fuel Ratio Sensor 1 Bank 2
  • Air Fuel Ratio Sensor 1 Bank 2 harness is open or shorted
  • Air Fuel Ratio Sensor 1 Bank 2 circuit poor electrical connection For Models before 2005:
  • Faulty Heated Oxygen Sensor 1 Bank 2
  • Heated Oxygen Sensor 1 Bank 2 harness is open or shorted
  • Heated Oxygen Sensor 1 Bank 2 circuit poor electrical connection

How to Fix the DTC P1168 Nissan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1168 Nissan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1168 Nissan code?

Need more information on how to fix the P1168 Nissan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1168 Nissan code diagnosed by a professional: Find a repair shop in your area

Information for Specific Nissan Models

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1168 Nissan Code

1. What are the common symptoms of OBDII code P1168 in a Nissan related to Closed Loop Control Function Bank 2?

The common symptoms include poor fuel economy, rough idling, engine hesitation, and potential stalling.

2. What are possible causes of OBDII code P1168 in a Nissan indicating an issue with Closed Loop Control Function Bank 2?

Potential causes may include a faulty oxygen sensor, a vacuum leak, a dirty or clogged air filter, or issues with the fuel system.

3. How can I diagnose the OBDII code P1168 in a Nissan related to Closed Loop Control Function Bank 2?

Diagnosis typically involves using an OBDII scanner to read the code, checking the oxygen sensor's readings, inspecting for vacuum leaks, and testing the airflow sensor.

4. What should I do if my Nissan triggers OBDII code P1168 for Closed Loop Control Function Bank 2?

It's recommended to address the underlying issue promptly to prevent further damage. Consider seeking professional help for a comprehensive diagnosis and repair.

5. Can I drive my Nissan with OBDII code P1168 for Closed Loop Control Function Bank 2?

While the vehicle may still be drivable with this code, it's advisable to have it inspected and repaired as soon as possible to avoid potential performance issues and further damage.

6. How much does it typically cost to repair OBDII code P1168 in a Nissan related to Closed Loop Control Function Bank 2?

Repair costs can vary depending on the exact cause of the issue. It's best to consult a mechanic for an accurate diagnosis and cost estimate.

7. Are there any DIY repair tips for addressing OBDII code P1168 in a Nissan?

DIY repair tips may include checking and cleaning the air filter, inspecting for visible vacuum leaks, and ensuring proper fuel system maintenance. However, more complex issues may require professional attention.

8. How does OBDII code P1168 impact the performance of a Nissan's engine?

This code can affect the engine's fuel efficiency, idle quality, and overall performance. Ignoring the issue may lead to more severe engine problems over time.

9. Is OBDII code P1168 in a Nissan related to Closed Loop Control Function Bank 2 a common issue?

While it's not as common as some other OBDII codes, encountering P1168 in a Nissan can still happen due to various factors affecting the closed-loop control system.

10. Can resetting the OBDII code P1168 in a Nissan related to Closed Loop Control Function Bank 2 temporarily fix the issue?

Resetting the code may temporarily clear the warning light, but if the underlying problem is not addressed, the code is likely to reappear. It's essential to diagnose and repair the root cause.

Discuss the causes and fixes for P1168 Nissan OBDII Code

  • i have many codes how do i fix them #1 is p0325 the knock sensor,  #2 is p1168 fuel and air metering controled malf.,  #3 is p1335 is ignition system or misfired,  #4 is p0155 is bank 2, sensor 1-- 02sensor heater curcuit malf.

  • You should start by replacing the A/F sensor.

  • Sensor 1 bank 2
    Where is this O2 sensor on a 2004 Nissan Titan? Is that before or after the catalyst converter?

  • Passenger side of the engine before the cat:

  • i have a 2004 murano that i got some bad gas in which clogged the fuel filter, which eventually caused one of my catlytic converter to melt out and clog the lower cat, i replaced the lower cat already but when i go to drive it, it developes a random misfire as the motor warms up to its normal operating temperature and two codes show... P1051 and P1168. any ideas?

  • You may have a bad sensor, both codes are for the Air Fuel Ratio Sensor 1 Bank 2.

  • Hello, I have a 2006 Nissan Frontier, 4WD, 4.0L V-6, and the "Service Engine Soon" light just came on. Took truck to AutoZone, to get the codes read. Code 1: P:1168, which should be a "failed HO2S21 Sensor (Heated O2 Sensor Bank 2-Sensor 1". Code 2: P0150, which should be a "failed air/fuel ratio sensor (sensor 1 bank 2). Can anyone confirm that these are the correct definitions for these codes? Also, can anyone help me to determine where to locate these sensors on the vehicle? Which side of the engine is bank 2? Thanks in advance for your help. Rick

  • Yes that is the correct definitions. Here is a diagram for your 2006 Nissan Frontier Sensor location:

    Source and mor images: http://nissanhelp.com/diy/f...

  • Thank you very much for your response.
    I purchased a replacement fuel/air ratio sensor and a replacement heated o2 sensor, and installed them yesterday (7/4/15). When I started the truck, the "service engine soon" light went out. I was a happy camper.
    This morning, I reset a "Tire Pressure Monitoring System" light on the dash. When I went to drive the truck this morning, I observed that the "service engine soon" light was back on.
    Is there any relationship between the "TPMS" light and the "service engine soon" light?
    I was careful not to contaminate the sensor probe tips when I installed the sensors. I was also careful to make sure that the connectors were completely seated/engaged.
    Any thoughts or ideas?

  • I have nissan maxima 2008 model by scanning it show P1168- powertrain the second fault show P0051-powertrain H025 Heater control circuit low (Bank 2 sensor 1) please explain this to me the meaning.

  • Both codes are for the same sensor, so more than likely the problem is the sensor it self. I recommend replacing the "Air Fuel Ratio (Oxygen Sensor) Sensor Bank 2"

  • I have a 2005 nissan frontier 2WD V6 4.0L and I'm receiving p1051 and p1168 as well. I replaced the upstream drivers side a/f sensor and reset the ecm but no luck. Any suggestions on how to continue troubleshooting? I figure to look at the harness but I haven't had time to look up what voltages should be there

  • Start by checking if there no exhaust leaks near the sensor and that the sensor is firmely connected. If no leaks are found, the the next step is to Clear Mixture Ratio Self-Learning Control Data.

    Instructions here: https://www.nissanhelp.com/...

  • how do I no what sensor it is up or downstream before or after cats I have codes p1051 p0420 p1168 I cant afford all of them help on a 05 titan

  • "Sensor 1" are before the catalytic converters (also know as Upstream)

    "Sensor 2" are after the catalytic converters (also know as Downstream)

    P1168 and P0420 are NOT for the sensors, but could be related to the sensor. In your case is the P1051 Air Fuel Ratio Sensor 1 (Also know as Upstream Oxygen Sensor)

    P1168 NISSAN - Closed Loop Control Function Bank 2
    Read more: https://www.autocodes.com/p...

    P0420 NISSAN - Catalyst System Efficiency Below Threshold Bank 1
    Read more: https://www.autocodes.com/p...

    P1051 NISSAN - Air Fuel Ratio Sensor 1 Heater Control Circuit Low Bank 2
    Read more: https://www.autocodes.com/p...

    Sensors location visit here: https://www.nissanhelp.com/...

  • these are the code on my 2006 Nisian Titian p1148 p1168 0037 p0057 p0128 0031 p0051

  • Try clearing all the codes first, and then check what code comes back first. Make sure the Mass Air Flow (MAF) and air filter are clean, and try using high octane gas.

    P1148 NISSAN - Closed Loop Control Function Bank 1
    Read more: https://www.autocodes.com/p...

    P1168 NISSAN - Closed Loop Control Function Bank 2
    Read more: https://www.autocodes.com/p...

    P0037 NISSAN - HO2S12 Heater Control Circuit Low
    Read more: https://www.autocodes.com/p...

    P0051 NISSAN - HO2S21 Heater Control Circuit Low
    Read more: https://www.autocodes.com/p...

    P0057 NISSAN - HO2S22 Heater Control Circuit Low
    Read more: https://www.autocodes.com/p...

    P0128 NISSAN - Thermostat Function
    Read more: https://www.autocodes.com/p...

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play