AutoCodes – Honda – P1164 1998 Honda Civic

P1164 1998 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1164 1998 Honda Civic indicates Air/Fuel Ratio Sensor 1 Range/Performance Problem.
Common causes: Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,363

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1164 1998 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.

OBDII Code P1164 1998 Honda Civic - Air/Fuel Ratio Sensor 1 Range/Performance Problem - AutoCodes.com — P1164 1998 Honda Civic Code - Air/Fuel Ratio Sensor 1 Range/Performance Problem

What does this mean?

What are the Possible Causes of the DTC P1164 1998 Honda Civic?

Faulty Air/Fuel Ratio Sensor 1
Air/Fuel Ratio Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How to Fix the DTC P1164 1998 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1164 1998 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1164 1998 Honda Civic code?

Need more information on how to fix the P1164 1998 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1164 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1164 1998 Honda Civic Code

1. What are the common symptoms of OBDII code P1164 on a 1998 Honda Civic?

The common symptoms of P1164 on a 1998 Honda Civic include poor fuel economy, engine hesitation, rough idling, and an illuminated check engine light.

2. What does the OBDII code P1164 in a 1998 Honda Civic indicate?

P1164 indicates an Air/Fuel Ratio Sensor 1 Range/Performance Problem in a 1998 Honda Civic. This means that there is an issue with the air/fuel ratio sensor located in the exhaust system.

3. What are the possible causes of OBDII code P1164 on a 1998 Honda Civic?

Possible causes of P1164 in a 1998 Honda Civic include a faulty air/fuel ratio sensor, wiring or connector issues, exhaust leaks, or a problem with the engine's air intake system.

4. How can I diagnose the OBDII code P1164 on my 1998 Honda Civic?

Diagnosing P1164 involves using an OBDII scanner to retrieve the code, inspecting the air/fuel ratio sensor and its connections, checking for exhaust leaks, and testing the sensor's voltage output.

5. Can I continue driving my 1998 Honda Civic with the P1164 code?

It is not recommended to drive your 1998 Honda Civic with the P1164 code illuminated, as it can lead to poor engine performance and potentially cause further damage if left unresolved.

6. How can I repair OBDII code P1164 on a 1998 Honda Civic?

Repairing P1164 may involve replacing the air/fuel ratio sensor, repairing any damaged wiring or connectors, fixing exhaust leaks, and ensuring proper functioning of the engine's air intake system.

7. Is it safe to reset the check engine light after fixing P1164 on a 1998 Honda Civic?

Yes, once you have fixed the issue causing P1164 on your 1998 Honda Civic, you can safely reset the check engine light using an OBDII scanner to clear the stored error code.

8. Can a DIY enthusiast fix the OBDII code P1164 on a 1998 Honda Civic?

Depending on your level of automotive knowledge and experience, you may be able to address the P1164 code yourself by following repair guides and using the appropriate tools.

9. Will ignoring the OBDII code P1164 affect the emissions of my 1998 Honda Civic?

Ignoring the P1164 code can lead to increased emissions from your 1998 Honda Civic, which may result in a failed emissions test and potential environmental impact.

10. How often does the air/fuel ratio sensor need to be replaced in a 1998 Honda Civic?

The air/fuel ratio sensor in a 1998 Honda Civic may need replacement every 60,000 to 100,000 miles or as recommended by the manufacturer to ensure optimal engine performance and emissions control.