AutoCodes – Honda – P1163 1996 Honda Civic

P1163 1996 Honda Civic Code - Air/Fuel Ratio Sensor 1 Slow Response

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1163 1996 Honda Civic indicates Air/Fuel Ratio Sensor 1 Slow Response.
Common causes
Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,006
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 03, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1163 1996 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.
OBDII Code P1163 1996 Honda Civic - Air/Fuel Ratio Sensor 1 Slow Response - AutoCodes.com
P1163 1996 Honda Civic Code - Air/Fuel Ratio Sensor 1 Slow Response

What are the Possible Causes of the DTC P1163 1996 Honda Civic?

  • Faulty Air/Fuel Ratio Sensor 1
  • Air/Fuel Ratio Sensor 1 harness is open or shorted
  • Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How to Fix the DTC P1163 1996 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1163 1996 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1163 1996 Honda Civic code?

Need more information on how to fix the P1163 1996 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1163 1996 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1163 1996 Honda Civic Code

1. What are the common symptoms of OBDII code P1163 in a 1996 Honda Civic?

- Common symptoms include poor fuel economy, rough idling, lack of power, and the illumination of the Check Engine Light.

2. What causes the OBDII code P1163 in a 1996 Honda Civic?

- The code is typically triggered by a slow response from Air/Fuel Ratio Sensor 1, which may be caused by a faulty sensor, wiring issues, or an exhaust system leak.

3. How can I diagnose the OBDII code P1163 in my 1996 Honda Civic?

- Diagnosis involves using an OBDII scanner to retrieve the code, inspecting the sensor and its wiring, and checking for any exhaust leaks.

4. Can I drive my 1996 Honda Civic with the OBDII code P1163?

- It is not recommended to drive with this code present, as it can lead to decreased fuel efficiency and potential damage to the engine over time.

5. How do I repair the OBDII code P1163 in my 1996 Honda Civic?

- The repair may involve replacing the Air/Fuel Ratio Sensor 1, repairing any damaged wiring, or fixing any exhaust leaks in the system.

6. Are there any DIY tips for resolving the OBDII code P1163 in a 1996 Honda Civic?

- DIY tips include checking the sensor's connections, inspecting the wiring for damage, and ensuring the exhaust system is sealed properly.

7. How much does it cost to fix the OBDII code P1163 in a 1996 Honda Civic?

- The cost of repairs can vary depending on the exact cause of the code, but it may range from $200 to $500 at a repair shop.

8. Can a faulty Air/Fuel Ratio Sensor 1 cause other issues in a 1996 Honda Civic?

- Yes, a faulty sensor can lead to poor engine performance, decreased fuel efficiency, and potential damage to the catalytic converter over time.

9. How often should I replace the Air/Fuel Ratio Sensor in my 1996 Honda Civic?

- It is recommended to follow the manufacturer's guidelines for sensor replacement, typically every 60,000 to 100,000 miles.

10. Will resetting the OBDII code P1163 in my 1996 Honda Civic make it go away permanently?

- Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue is not addressed, the code is likely to reappear.

Discuss the causes and fixes for P1163 1996 Honda Civic OBDII Code

Code P1163 1996 Honda Civic comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play