AutoCodesAudi – P1162 Audi

P1162 Audi Code - Intake Air Temperature Sensor Short To Ground

Quick Answer

P1162 Audi indicates Intake Air Temperature Sensor Short To Ground. Common causes include Faulty Intake Air Temperature Sensor, Intake Air Temperature Sensor harness is shorted, Intake Air Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1162 Audi indicates Intake Air Temperature Sensor Short To Ground.
Common causes
Common causes include Faulty Intake Air Temperature Sensor, Intake Air Temperature Sensor harness is shorted, Intake Air Temperature Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,019
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on May 03, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1162 Audi Description

OBDII Code P1162 Audi - Intake Air Temperature Sensor Short To Ground - AutoCodes.com
P1162 Audi Code - Intake Air Temperature Sensor Short To Ground

What are the Possible Causes of the DTC P1162 Audi?

  • Faulty Intake Air Temperature Sensor
  • Intake Air Temperature Sensor harness is shorted
  • Intake Air Temperature Sensor circuit poor electrical connection

How to Fix the DTC P1162 Audi?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1162 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1162 Audi code?

Need more information on how to fix the P1162 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1162 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1162 Audi Code

1. What does the OBDII code P1162 mean on an Audi?

Code P1162 indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically a short to ground.

2. What are the symptoms of code P1162 on an Audi?

Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and possible difficulty starting the engine.

3. What causes the P1162 code in an Audi?

The code is typically caused by damaged or frayed wiring, a faulty IAT sensor, or corrosion in the sensor's electrical connectors.

4. Can you drive an Audi with the P1162 code active?

While the car may still run, driving with this code can lead to poor engine performance and potential long-term damage. It’s best to address the issue promptly.

5. How do you diagnose the P1162 code on an Audi?

Start by inspecting the IAT sensor and its wiring for visible damage, checking for corrosion at the connectors, and testing the sensor’s resistance using a multimeter.

6. What repairs can fix the P1162 code in an Audi?

Repairs may include replacing the IAT sensor, repairing or replacing damaged wiring, and cleaning corroded connectors.

7. How much does it typically cost to fix the P1162 code on an Audi?

Costs vary, but replacing the IAT sensor generally ranges from $50 to $150 for parts, plus labor costs if you hire a mechanic.

8. Can a dirty air filter trigger the P1162 code in an Audi?

A dirty air filter is unlikely to directly cause the code but can contribute to poor airflow, which might exacerbate intake air temperature issues.

9. How do you prevent the P1162 code from appearing on an Audi?

Regular maintenance, including inspecting wiring and connectors for damage and replacing the IAT sensor when it begins to fail, can help prevent this code.

10. What tools are needed to fix the P1162 code on an Audi?

Essential tools include a multimeter for testing the sensor, basic hand tools for removal and installation, and a diagnostic scanner to clear the code.

Discuss the causes and fixes for P1162 Audi OBDII Code

Code P1162 Audi comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play