AutoCodes – Honda – P1162 1998 Honda Civic

P1162 1998 Honda Civic Code - Air/Fuel Ratio Sensor 1 Circuit Malfunction

Quick Answer

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1162 1998 Honda Civic indicates Air/Fuel Ratio Sensor 1 Circuit Malfunction.
Common causes: Common causes include Faulty Air/Fuel Ratio Sensor 1, Air/Fuel Ratio Sensor 1 harness is open or shorted, Air/Fuel Ratio Sensor 1 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,321

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 03, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1162 1998 Honda Civic Description

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.

OBDII Code P1162 1998 Honda Civic - Air/Fuel Ratio Sensor 1 Circuit Malfunction - AutoCodes.com — P1162 1998 Honda Civic Code - Air/Fuel Ratio Sensor 1 Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P1162 1998 Honda Civic?

Faulty Air/Fuel Ratio Sensor 1
Air/Fuel Ratio Sensor 1 harness is open or shorted
Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How to Fix the DTC P1162 1998 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1162 1998 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1162 1998 Honda Civic code?

Need more information on how to fix the P1162 1998 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1162 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1162 1998 Honda Civic Code

1. What are common symptoms of OBDII code P1162 in a 1998 Honda Civic?

The common symptoms of code P1162 in a 1998 Honda Civic include poor fuel economy, rough idling, hesitation or stalling, and an illuminated check engine light.

2. What does the OBDII code P1162 for a 1998 Honda Civic indicate?

Code P1162 on a 1998 Honda Civic indicates a malfunction in the Air/Fuel Ratio Sensor 1 Circuit.

3. What are some possible causes of OBDII code P1162 in a 1998 Honda Civic?

Potential causes of code P1162 in a 1998 Honda Civic include a faulty air/fuel ratio sensor, wiring or connector issues, a vacuum leak, or an exhaust system problem.

4. How can I diagnose the OBDII code P1162 in my 1998 Honda Civic?

To diagnose code P1162 in a 1998 Honda Civic, you can use an OBDII scanner to retrieve the code, visually inspect the sensor and its connections, check for damaged wiring, and perform voltage tests on the sensor.

5. Is it safe to drive with OBDII code P1162 in a 1998 Honda Civic?

It is not recommended to drive with code P1162 in a 1998 Honda Civic as it can lead to poor engine performance and potential damage if left unresolved.

6. Can I repair OBDII code P1162 in my 1998 Honda Civic myself?

If you have the necessary tools and expertise, you may be able to repair code P1162 in a 1998 Honda Civic yourself by replacing the air/fuel ratio sensor, repairing wiring issues, or fixing any vacuum leaks.

7. How much does it cost to fix OBDII code P1162 in a 1998 Honda Civic?

The cost to fix code P1162 in a 1998 Honda Civic can vary depending on the underlying cause. It may range from a few hundred dollars for a DIY repair to over a thousand dollars if professional help is needed.

8. Will resetting the check engine light resolve OBDII code P1162 in a 1998 Honda Civic?

Resetting the check engine light may temporarily clear the code, but it will not fix the underlying issue causing code P1162 in a 1998 Honda Civic.

9. Can a bad air/fuel ratio sensor cause other problems in a 1998 Honda Civic besides code P1162?

Yes, a faulty air/fuel ratio sensor in a 1998 Honda Civic can cause other issues such as poor engine performance, decreased fuel efficiency, and increased emissions.

10. How often should the air/fuel ratio sensor be replaced in a 1998 Honda Civic?

The air/fuel ratio sensor in a 1998 Honda Civic typically lasts around 100,000 miles, but it is recommended to follow the manufacturer's maintenance schedule for specific replacement intervals.