P1160 2014 Chevrolet Silverado Code - O2 Reference Voltage Circuit High Voltage (NOx Sensor 1)
Quick Answer
The Nitrogen Oxides (NOx) sensors are part of the selective catalytic reduction system, a device used to reduce NOx emission on diesel engines. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1160 2014 Chevrolet Silverado indicates O2 Reference Voltage Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1160 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P1160 2014 Chevrolet Silverado?
- Faulty Nitrogen Oxides (NOx) Sensor
- Nitrogen Oxides Sensor harness is open or shorted
- Nitrogen Oxides Sensor circuit poor electrical connection
How to Fix the DTC P1160 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1160 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1160 2014 Chevrolet Silverado code?
Need more information on how to fix the P1160 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1160 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1160 2014 Chevrolet Silverado Code
1. What does the OBDII code P1160 mean on a 2014 Chevrolet Silverado?
P1160 indicates a problem with the O2 reference voltage circuit for NOx Sensor 1, showing unusually high voltage.
2. What are the common symptoms of code P1160 in a 2014 Chevrolet Silverado?
Symptoms may include the check engine light, reduced fuel efficiency, poor engine performance, or difficulty passing emissions tests.
3. What causes the P1160 code on a 2014 Chevrolet Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 reference circuit, or a malfunctioning engine control module (ECM).
4. How is the P1160 code diagnosed on a 2014 Chevrolet Silverado?
Diagnosis typically involves scanning the ECM for codes, inspecting the wiring and connectors, testing the NOx sensor, and verifying the reference voltage circuit.
5. Can I drive my 2014 Chevrolet Silverado with a P1160 code?
Driving with this code is not recommended as it may lead to poor engine performance, increased emissions, and potential damage to other components.
6. How do I fix the P1160 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the ECM.
7. How much does it cost to fix the P1160 code on a 2014 Chevrolet Silverado?
Repair costs vary but typically range from $200 to $600, depending on whether the NOx sensor or wiring needs replacement.
8. Can a bad NOx sensor cause the P1160 code in a 2014 Chevrolet Silverado?
Yes, a faulty NOx sensor is one of the most common causes of this code.
9. What tools are needed to diagnose the P1160 code on a 2014 Chevrolet Silverado?
You’ll need an OBDII scanner, a multimeter for voltage testing, and possibly wiring diagrams for the vehicle.
10. Can a software update fix the P1160 code on a 2014 Chevrolet Silverado?
In some cases, an ECM software update may resolve the issue if it’s related to a programming error.
Discuss the causes and fixes for P1160 2014 Chevrolet Silverado OBDII Code
Code P1160 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.