AutoCodes – Hyundai – P1150 Hyundai

P1150 Hyundai Code - Barometric Pressure Sensor Malfunction

Quick Answer

P1150 Hyundai indicates Barometric Pressure Sensor Malfunction. Common causes for P1150 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1150 Hyundai indicates Barometric Pressure Sensor Malfunction.
Common causes: Common causes for P1150 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,130

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 02, 2019

Description
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1150 Hyundai Description

OBDII Code P1150 Hyundai - Barometric Pressure Sensor Malfunction - AutoCodes.com — P1150 Hyundai Code - Barometric Pressure Sensor Malfunction

How to Fix the DTC P1150 Hyundai?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1150 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1150 Hyundai code?

Need more information on how to fix the P1150 Hyundai code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1150 Hyundai code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1150 Hyundai Code

1. What are the common symptoms of a Barometric Pressure Sensor Malfunction (P1150) in a Hyundai?

- Common symptoms include rough idling, poor fuel efficiency, engine stalling, and a decrease in overall engine performance.

2. What are the likely causes of the P1150 OBDII code in a Hyundai?

- The P1150 code in a Hyundai is typically triggered by a faulty barometric pressure sensor, a vacuum leak, or issues with the engine's air intake system.

3. How can I diagnose a Barometric Pressure Sensor Malfunction in my Hyundai?

- To diagnose a P1150 code, you can use an OBDII scanner to retrieve the code and inspect the barometric pressure sensor and related components for any signs of damage or malfunction.

4. Can I drive my Hyundai with a P1150 OBDII code?

- It is not recommended to drive your Hyundai with a P1150 code as it can lead to further engine damage and potential safety hazards. It is best to address the issue promptly.

5. How can I repair a Barometric Pressure Sensor Malfunction in my Hyundai?

- Repairing a P1150 code typically involves replacing the faulty barometric pressure sensor, addressing any vacuum leaks, and ensuring the air intake system is functioning properly.

6. Will resetting the OBDII code make the issue go away temporarily?

- Resetting the OBDII code may temporarily clear the warning light, but it will not fix the underlying issue causing the P1150 code. It is important to diagnose and address the root cause of the problem.

7. Can a DIY enthusiast fix a P1150 code in a Hyundai?

- Depending on your skill level and access to tools, a DIY enthusiast may be able to replace the barometric pressure sensor and address any vacuum leaks causing the P1150 code. However, professional assistance is recommended for accurate diagnosis and repair.

8. How much does it cost to repair a P1150 code in a Hyundai?

- The cost of repairing a P1150 code in a Hyundai can vary depending on the extent of the issue, the cost of parts, and labor charges. It is advisable to obtain quotes from reputable mechanics or service centers.

9. Is it necessary to replace the barometric pressure sensor if it is malfunctioning?

- Yes, it is essential to replace the barometric pressure sensor if it is malfunctioning to ensure proper engine performance and fuel efficiency in your Hyundai.

10. Can a P1150 code be related to other engine issues in a Hyundai?

- Yes, a P1150 code may be related to other engine issues such as problems with the mass airflow sensor, oxygen sensor, or issues with the fuel system. It is crucial to diagnose the code accurately to address any related problems.