P1137 2005 Nissan Sentra Code - Swirl Control Valve Control Position Sensor Circuit
Quick Answer
Swirl control valve position sensor is installed on the intake manifold. Common causes include Faulty Swirl Control Valve Control Position Sensor, Swirl Control Valve Control Position Sensor harness is open or shorted, Swirl Control Valve Control Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1137 2005 Nissan Sentra indicates Swirl Control Valve Control Position Sensor Circuit.
- Common causes
- Common causes include Faulty Swirl Control Valve Control Position Sensor, Swirl Control Valve Control Position Sensor harness is open or shorted, Swirl Control Valve Control Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1137 2005 Nissan Sentra Description
The sensor is connected to the front end of the valve shaft of the swirl control valve.
The sensor responds to the valve shaft movement. This sensor is a kind of potentiometer which transforms the swirl control valve position into output voltage, and emits the voltage signal to the Engine Control Module (ECM).
What are the Possible Causes of the DTC P1137 2005 Nissan Sentra?
- Faulty Swirl Control Valve Control Position Sensor
- Swirl Control Valve Control Position Sensor harness is open or shorted
- Swirl Control Valve Control Position Sensor circuit poor electrical connection
- Faulty Swirl Control Valve
How to Fix the DTC P1137 2005 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1137 2005 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1137 2005 Nissan Sentra code?
Need more information on how to fix the P1137 2005 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1137 2005 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1137 2005 Nissan Sentra Code
1. What does OBDII code P1137 on a 2005 Nissan Sentra indicate?
The code P1137 for a 2005 Nissan Sentra specifically refers to the Swirl Control Valve Control Position Sensor Circuit.
2. What are common symptoms of a Swirl Control Valve Control Position Sensor Circuit issue on a 2005 Nissan Sentra?
Common symptoms may include rough idling, engine misfires, decreased fuel efficiency, and a check engine light illuminated on the dashboard.
3. What are possible causes of the P1137 code on a 2005 Nissan Sentra?
Potential causes may include a faulty swirl control valve, damaged wiring or connectors in the sensor circuit, or a malfunctioning swirl control valve control position sensor.
4. How can I diagnose a Swirl Control Valve Control Position Sensor Circuit problem on my 2005 Nissan Sentra?
Diagnosing this issue typically involves using an OBDII scanner to retrieve the specific trouble code, visually inspecting the swirl control valve and its sensor, and testing the sensor's circuit for proper voltage and continuity.
5. Can I drive my 2005 Nissan Sentra with the P1137 code?
It is not recommended to drive your vehicle with the P1137 code present, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.
6. How can I repair a Swirl Control Valve Control Position Sensor Circuit problem on my 2005 Nissan Sentra?
Repair options may include replacing the swirl control valve, repairing damaged wiring or connectors, or replacing the swirl control valve control position sensor as needed.
7. Are there any DIY tips for fixing the P1137 code on a 2005 Nissan Sentra?
If you are comfortable working on your vehicle, you can attempt to inspect the sensor circuit and connections for visible damage or corrosion. However, for more complex repairs, it is recommended to seek professional assistance.
8. Will resetting the check engine light resolve the P1137 code on a 2005 Nissan Sentra?
Simply resetting the check engine light will not fix the underlying issue causing the P1137 code. It is important to diagnose and address the root cause of the problem to prevent further issues.
9. How much does it typically cost to repair a P1137 code on a 2005 Nissan Sentra?
The cost of repairing a P1137 code can vary depending on the specific cause of the issue and whether you choose to repair it yourself or take it to a mechanic. Costs may range from a few hundred to over a thousand dollars.
10. Can a P1137 code on a 2005 Nissan Sentra cause further damage if left untreated?
Leaving the P1137 code unresolved can potentially lead to more severe engine problems over time, such as reduced performance, increased fuel consumption, and even engine damage. It is best to address the issue promptly to prevent further complications.
Discuss the causes and fixes for P1137 2005 Nissan Sentra OBDII Code
Code P1137 2005 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
