P1136 2005 Nissan Maxima Code - Intake Valve Timing Control Solenoid Valve Circuit Bank 2
Quick Answer
The intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Timing Control Solenoid Bank 2, Intake Valve Timing Control Solenoid Bank 2 harness is open or shorted, Intake Valve Timing Control Solenoid Bank 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1136 2005 Nissan Maxima indicates Intake Valve Timing Control Solenoid Valve Circuit Bank 2.
- Common causes
- Common causes include Faulty Intake Valve Timing Control Solenoid Bank 2, Intake Valve Timing Control Solenoid Bank 2 harness is open or shorted, Intake Valve Timing Control Solenoid Bank 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1136 2005 Nissan Maxima Description
The longer pulse width advances the valve angle. The shorter pulse width retards the valve angle.
When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
The Diagnostic Trouble Code (DTC) when an improper voltage is sent to the ECM through the intake valve timing control solenoid valve.
What are the Possible Causes of the DTC P1136 2005 Nissan Maxima?
- Faulty Intake Valve Timing Control Solenoid Bank 2
- Intake Valve Timing Control Solenoid Bank 2 harness is open or shorted
- Intake Valve Timing Control Solenoid Bank 2 circuit poor electrical connection
How to Fix the DTC P1136 2005 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1136 2005 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1136 2005 Nissan Maxima code?
Need more information on how to fix the P1136 2005 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1136 2005 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1136 2005 Nissan Maxima Code
1. What are the common symptoms of OBDII code P1136 in a 2005 Nissan Maxima?
- Common symptoms include rough idle, poor engine performance, decreased fuel efficiency, and potential stalling.
2. What does the Intake Valve Timing Control Solenoid Valve Circuit Bank 2 do in a 2005 Nissan Maxima?
- The solenoid controls the intake valve timing, optimizing engine performance and efficiency.
3. What are the possible causes of OBDII code P1136 in a 2005 Nissan Maxima?
- Causes can include a faulty intake valve timing control solenoid, wiring issues, or a malfunctioning engine control module.
4. How can I diagnose OBDII code P1136 in my 2005 Nissan Maxima?
- Diagnosing involves checking the intake valve timing control solenoid, inspecting related wiring, and using a scan tool to monitor signals.
5. Can I continue driving my 2005 Nissan Maxima with OBDII code P1136 present?
- It is not recommended to continue driving with this code as it can lead to further engine damage and potential safety risks.
6. How can I repair OBDII code P1136 in my 2005 Nissan Maxima?
- Repair typically involves replacing the faulty intake valve timing control solenoid, repairing any damaged wiring, and clearing the trouble code.
7. Is it possible to reset OBDII code P1136 in a 2005 Nissan Maxima without making any repairs?
- While you can clear the code temporarily, it is important to address the underlying issue to prevent it from reoccurring.
8. How much does it cost to fix OBDII code P1136 in a 2005 Nissan Maxima?
- Repair costs can vary depending on the specific issue, but expect to pay for parts and labor, with estimates ranging from $200 to $500.
9. Can a DIY enthusiast fix OBDII code P1136 in a 2005 Nissan Maxima?
- Depending on your automotive skills and tools, replacing the intake valve timing control solenoid can be a DIY project for some enthusiasts.
10. How often does OBDII code P1136 occur in 2005 Nissan Maxima vehicles?
- While not extremely common, this code can appear due to various factors such as age, mileage, and maintenance history of the vehicle.
Discuss the causes and fixes for P1136 2005 Nissan Maxima OBDII Code
Code P1136 2005 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
