P1133 2014 Chevrolet Silverado Code - HO2S Insufficient Switching Bank 1 Sensor 1
Quick Answer
The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1, Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1133 2014 Chevrolet Silverado indicates HO2S Insufficient Switching Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1, Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted, Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1133 2014 Chevrolet Silverado Description
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the ECM to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will be set when the ECM detects that the heated oxygen sensor rich-to-lean counts or the lean-to-rich counts are less than a calibrated value greater than 100s.
What are the Possible Causes of the DTC P1133 2014 Chevrolet Silverado?
- Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
- Heated Oxygen Sensor Bank 1 Sensor 1 harness is open or shorted
- Heated Oxygen Sensor Bank 1 Sensor 1 circuit poor electrical connection
- Low or high fuel system pressure
- Fuel contamination
- Faulty fuel injectors
- Exhaust gas leaks
- Engine vacuum leaks
How to Fix the DTC P1133 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1133 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1133 2014 Chevrolet Silverado code?
Need more information on how to fix the P1133 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1133 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1133 2014 Chevrolet Silverado Code
What does the OBDII code P1133 mean on a 2014 Chevrolet Silverado?
P1133 indicates that the upstream oxygen sensor (Bank 1 Sensor 1) is not switching properly between rich and lean conditions as expected by the engine control module (ECM).
What are the common symptoms of code P1133 in a 2014 Chevrolet Silverado?
Symptoms may include poor fuel economy, rough idling, hesitation during acceleration, a potential drop in engine performance, and an illuminated check engine light.
What causes the P1133 code to appear?
Common causes include a failing Bank 1 Sensor 1 oxygen sensor, exhaust leaks, issues with the wiring or connectors for the sensor, or a problem with the engine's air-fuel mixture.
How do I know which oxygen sensor is Bank 1 Sensor 1?
Bank 1 refers to the side of the engine with cylinder 1, and Sensor 1 is the upstream sensor located before the catalytic converter.
Can a dirty air filter trigger the P1133 code?
A dirty air filter can restrict airflow, which might contribute to an improper air-fuel mixture, potentially leading to conditions that trigger the P1133 code.
How do you diagnose the P1133 code on a 2014 Chevrolet Silverado?
Diagnosis involves using a scan tool to monitor live data from the oxygen sensors, inspecting the wiring and connections, checking for exhaust leaks, and testing the performance of the sensor itself.
Can you drive with the P1133 code active?
While the vehicle may still be drivable, ignoring the code can lead to reduced fuel efficiency and potentially damage the catalytic converter over time.
How much does it cost to fix the P1133 code?
Repair costs vary but typically range from $150 to $300 for parts and labor if the oxygen sensor needs replacement. Additional repairs may be necessary if other issues are found.
How can I prevent the P1133 code from returning?
Regular maintenance, such as replacing the oxygen sensors at recommended intervals, ensuring no exhaust leaks, and maintaining a clean air filter, can help prevent the code from recurring.
Does the P1133 code always mean the oxygen sensor is faulty?
No, the code can also be caused by wiring issues, exhaust leaks, or an incorrect air-fuel mixture, so thorough diagnosis is necessary before replacing any parts.
Discuss the causes and fixes for P1133 2014 Chevrolet Silverado OBDII Code
Code P1133 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
