P1130 Code - Swirl Control Valve Control Solenoid Valve
Quick Answer
This system has a swirl control valve in the intake passage of each cylinder. Common causes include Faulty Swirl control valve control solenoid valve, Swirl control valve control solenoid valve circuit is open or shorted, Swirl control valve circuit is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1130 indicates Swirl Control Valve Control Solenoid Valve.
- Common causes
- Common causes include Faulty Swirl control valve control solenoid valve, Swirl control valve control solenoid valve circuit is open or shorted, Swirl control valve circuit is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1130 Description
While idling and during low engine speed operation, the swirl control valve closes. Thus the velocity of the air in the intake passage increases, promoting the vaporization of the fuel and producing a swirl in the combustion chamber.
Because of this operation, this system tends to increase the burning speed of the gas mixture, improve fuel consumption, and increase the stability in running conditions.
Also, except when idling and during low engine speed operation, this system opens the swirl control valve. In this condition, this system tends to increase power by improving intake efficiency via reduction of intake flow resistance, intake flow.
The solenoid valve controls swirl control valve’s shut/open condition. This solenoid valve is operated by the Engine Control Module (ECM).
The swirl control valve control solenoid valve responds to signals from the ECM. When the ECM sends an ON (ground) signal, the solenoid valve is bypassed to apply intake manifold vacuum to the swirl control valve actuator. This operation closes the swirl control valve. When the ECM sends an OFF signal, the vacuum signal is cut and the swirl control valve opens.
What are the Possible Causes of the DTC P1130?
- Faulty Swirl control valve control solenoid valve
- Swirl control valve control solenoid valve circuit is open or shorted
- Swirl control valve circuit is open or shorted
- Faulty swirl control valve
- Faulty Swirl control valve actuator
How to Fix the DTC P1130?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1130 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1130 code?
Need more information on how to fix the P1130 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1130 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P1130 Audi — Long Term Fuel Trim B2 System Too Lean
- P1130 BMW — Oxygen Sensor Behind Catalytic Converter Ageing
- P1130 Buick — HO2S Circuit Low Variance Bank 1 Sensor 1
- P1130 Cadillac — HO2S Circuit Low Variance Bank 1 Sensor 1
- P1130 Chevrolet — HO2S Circuit Low Variance Bank 1 Sensor 1
- P1130 Ford — Lack of Upstream Heated Oxygen Sensor Switch Adaptive Fuel Limit Bank 1
- P1130 GMC — HO2S Circuit Low Variance Bank 1 Sensor 1
- P1130 Honda — Demand for Changing Both Secondary Heated Oxygen Sensor
- P1130 Hyundai — Start Solenoid- Malfunction
- P1130 Infiniti — Swirl Control Valve Control Solenoid Valve
- P1130 Lexus — Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction Bank 1 Sensor 1
- P1130 Lincoln — Lack of Upstream Heated Oxygen Sensor Switch Adaptive Fuel Limit Bank 1
- P1130 Mazda — Heated O2 Sensor 11 At Adaptive Limit
- P1130 Mercury — Lack of Upstream Heated Oxygen Sensor Switch Adaptive Fuel Limit Bank 1
- P1130 MINI — Oxygen Sensor Behind Catalytic Converter Ageing
- P1130 Nissan — Swirl Control Valve Control Solenoid Valve
- P1130 Scion — Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction Bank 1 Sensor 1
- P1130 Subaru — Front Oxygen Sensor Circuit Malfunction Open Circuit
- P1130 Toyota — Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction Bank 1 Sensor 1
- P1130 Volkswagen — Long Term Fuel Trim B2 System Too Lean
Frequently Asked Questions about P1130 Code
1. What are the common symptoms of OBDII code P1130 (Swirl Control Valve Control Solenoid Valve)?
- Common symptoms include rough idling, decreased engine performance, and illuminated Check Engine light.
2. What are the possible causes of OBDII code P1130?
- The possible causes of this code may include a faulty swirl control valve control solenoid valve, wiring issues, or a malfunctioning electrical circuit.
3. How can I diagnose the cause of OBDII code P1130?
- Diagnosing the cause of this code involves using an OBDII scanner to retrieve the code, checking the swirl control valve control solenoid valve for proper operation, and inspecting the wiring and connectors for any damage.
4. Can I drive my vehicle with OBDII code P1130?
- It is not recommended to drive your vehicle with this code as it may lead to further damage to the engine and decrease in fuel efficiency.
5. How do I repair OBDII code P1130?
- Repairing this code involves replacing the swirl control valve control solenoid valve if faulty, repairing any damaged wiring or connectors, and clearing the code with an OBDII scanner.
6. Is it possible to prevent OBDII code P1130 from occurring?
- Regular maintenance of the swirl control valve control solenoid valve and electrical components can help prevent this code from occurring.
7. Can a DIY enthusiast fix OBDII code P1130?
- Depending on their skill level, a DIY enthusiast may be able to fix this code by following repair guides or consulting with a professional for assistance.
8. How long does it take to repair OBDII code P1130?
- The repair time for this code may vary depending on the extent of the issue, but it can typically be resolved within a few hours.
9. Will OBDII code P1130 affect my vehicle's emissions?
- Yes, this code may lead to increased emissions and cause your vehicle to fail emissions tests.
10. How much does it cost to repair OBDII code P1130?
- The cost of repairing this code can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P1130 OBDII Code
Code P1130 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
