AutoCodes – Ford – P1124 2011 Ford Fusion

P1124 2011 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

Quick Answer

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1124 2011 Ford Fusion indicates Throttle Position Sensor Out of Self-Test Range.
Common causes: Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,366

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 26, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1124 2011 Ford Fusion Description

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate

OBDII Code P1124 2011 Ford Fusion - Throttle Position Sensor Out of Self-Test Range - AutoCodes.com — P1124 2011 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1124 2011 Ford Fusion?

Binding or bent throttle linkage
Faulty Throttle Position Sensor
Throttle Position Sensor harness is open or shorted
Throttle Position Sensor circuit poor electrical connection

How to Fix the DTC P1124 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The throttle position (TP) sensor circuit is monitored by the powertrain control module (PCM) for an out of range TP rotation angle or voltage input. The test fails if the TP rotation angle or voltage reading is less than 13.27% (0.66 volt) or greater than 23.52% (1.17 volts).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1124 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1124 2011 Ford Fusion code?

Need more information on how to fix the P1124 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1124 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1124 2011 Ford Fusion Code

1. What does OBDII code P1124 mean on a 2011 Ford Fusion?

The P1124 code indicates that the Throttle Position Sensor (TPS) is out of self-test range on a 2011 Ford Fusion.

2. What are the common symptoms of a Throttle Position Sensor issue on a 2011 Ford Fusion?

Common symptoms include poor acceleration, rough idling, stalling, and potentially reduced fuel efficiency.

3. What are the possible causes of the P1124 code on a 2011 Ford Fusion?

The P1124 code can be triggered by a faulty TPS, wiring issues, a dirty throttle body, or a malfunctioning PCM (Powertrain Control Module).

4. How can I diagnose the Throttle Position Sensor problem on my 2011 Ford Fusion?

You can use a scan tool to read the OBDII code, inspect the TPS wiring for any damage, visually check the TPS for signs of wear, and perform a throttle body cleaning.

5. What are the repair options for fixing the Throttle Position Sensor issue on a 2011 Ford Fusion?

Repair options include replacing the TPS, repairing any damaged wiring, cleaning the throttle body, and resetting the PCM.

6. Can I drive my 2011 Ford Fusion with the P1124 code present?

It is not recommended to drive your Fusion with the P1124 code active, as it can lead to poor performance and potential safety hazards.

7. How much does it typically cost to repair a Throttle Position Sensor problem on a 2011 Ford Fusion?

The cost of repairing a TPS issue can vary depending on the exact cause, but it typically ranges from $100 to $300 for parts and labor.

8. Will resetting the Check Engine Light resolve the P1124 code on a 2011 Ford Fusion?

Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue with the TPS is not addressed, the code is likely to reappear.

9. Can a DIY enthusiast replace the Throttle Position Sensor on a 2011 Ford Fusion?

Replacing the TPS can be a relatively straightforward DIY task for those with some mechanical experience and the right tools.

10. How often should I check the Throttle Position Sensor on my 2011 Ford Fusion?

It's recommended to include the TPS in your regular vehicle maintenance checks and address any issues promptly to prevent more significant problems down the road.