AutoCodes – Ford – P1124 2007 Ford Fusion

P1124 2007 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

Quick Answer

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1124 2007 Ford Fusion indicates Throttle Position Sensor Out of Self-Test Range.
Common causes: Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,535

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 26, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1124 2007 Ford Fusion Description

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate

OBDII Code P1124 2007 Ford Fusion - Throttle Position Sensor Out of Self-Test Range - AutoCodes.com — P1124 2007 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1124 2007 Ford Fusion?

Binding or bent throttle linkage
Faulty Throttle Position Sensor
Throttle Position Sensor harness is open or shorted
Throttle Position Sensor circuit poor electrical connection

How to Fix the DTC P1124 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The throttle position (TP) sensor circuit is monitored by the powertrain control module (PCM) for an out of range TP rotation angle or voltage input. The test fails if the TP rotation angle or voltage reading is less than 13.27% (0.66 volt) or greater than 23.52% (1.17 volts).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1124 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1124 2007 Ford Fusion code?

Need more information on how to fix the P1124 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1124 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1124 2007 Ford Fusion Code

1. What are the common symptoms of OBDII code P1124 on a 2007 Ford Fusion?

- Common symptoms include rough idling, stalling, poor acceleration, and illuminated Check Engine Light.

2. What does the OBDII code P1124 on a 2007 Ford Fusion indicate?

- The code P1124 indicates that the Throttle Position Sensor (TPS) is out of the self-test range.

3. What are the possible causes of OBDII code P1124 on a 2007 Ford Fusion?

- Possible causes include a faulty TPS, wiring issues in the TPS circuit, or a problem with the engine control module (ECM).

4. How can I diagnose the Throttle Position Sensor (TPS) on my 2007 Ford Fusion?

- You can use a multimeter to test the TPS for proper voltage readings and check for any wiring issues or loose connections.

5. Can I drive my 2007 Ford Fusion with OBDII code P1124?

- It is not recommended to drive your vehicle with code P1124 as it can lead to drivability issues and potential engine damage.

6. How can I repair OBDII code P1124 on my 2007 Ford Fusion?

- The most common repair is to replace the Throttle Position Sensor (TPS) and ensure the wiring connections are secure and free of damage.

7. Is it possible to reset OBDII code P1124 on a 2007 Ford Fusion without repairs?

- While clearing the code may temporarily turn off the Check Engine Light, it is essential to address the underlying issue to prevent further problems.

8. How much does it typically cost to fix OBDII code P1124 on a 2007 Ford Fusion?

- The cost of repairing code P1124 can vary depending on the labor rates and parts prices, but replacing the TPS is a common and relatively affordable fix.

9. Can a DIY enthusiast replace the Throttle Position Sensor (TPS) to fix OBDII code P1124 on a 2007 Ford Fusion?

- Yes, replacing the TPS can be a DIY project for those with some mechanical experience and the necessary tools.

10. How long does it take to repair OBDII code P1124 on a 2007 Ford Fusion?

- The repair time can vary depending on the skill level of the person performing the repair, but it typically takes around 1-2 hours to replace the Throttle Position Sensor (TPS).