AutoCodes – Ford – P1124 2006 Ford Fusion

P1124 2006 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

Quick Answer

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1124 2006 Ford Fusion indicates Throttle Position Sensor Out of Self-Test Range.
Common causes: Common causes include Binding or bent throttle linkage, Faulty Throttle Position Sensor, Throttle Position Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,282

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 26, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1124 2006 Ford Fusion Description

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. The TPS is a rotary potentiometer sensor that provides a signal to the Powertrain Control Module (PCM) that is linearly proportional to the throttle plate/shaft position. As the TPS is rotated by the throttle shaft, the following operating conditions are determined by the PCM:
• Closed throttle (includes idle or deceleration)
• Part throttle (includes cruise or moderate acceleration)
• Wide open throttle (includes maximum acceleration or de-choke on crank)
• Throttle angle rate

OBDII Code P1124 2006 Ford Fusion - Throttle Position Sensor Out of Self-Test Range - AutoCodes.com — P1124 2006 Ford Fusion Code - Throttle Position Sensor Out of Self-Test Range

What does this mean?

What are the Possible Causes of the DTC P1124 2006 Ford Fusion?

Binding or bent throttle linkage
Faulty Throttle Position Sensor
Throttle Position Sensor harness is open or shorted
Throttle Position Sensor circuit poor electrical connection

How to Fix the DTC P1124 2006 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

The throttle position (TP) sensor circuit is monitored by the powertrain control module (PCM) for an out of range TP rotation angle or voltage input. The test fails if the TP rotation angle or voltage reading is less than 13.27% (0.66 volt) or greater than 23.52% (1.17 volts).

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1124 2006 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1124 2006 Ford Fusion code?

Need more information on how to fix the P1124 2006 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1124 2006 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1124 2006 Ford Fusion Code

1. What does the OBDII code P1124 mean on a 2006 Ford Fusion?

P1124 indicates that the throttle position sensor (TPS) is out of the self-test range, meaning the TPS is not providing signals within the expected parameters during the vehicle's diagnostic self-test.

2. What are the common symptoms of a P1124 code?

Symptoms may include poor acceleration, hesitation, rough idling, reduced fuel efficiency, or the check engine light being illuminated.

3. What causes the P1124 code to appear?

Common causes include a faulty throttle position sensor, wiring issues, corroded or loose electrical connections, or a malfunctioning throttle body.

4. Can I drive my 2006 Ford Fusion with the P1124 code?

Driving may still be possible, but it is not recommended as the vehicle may experience reduced performance, which could lead to unsafe driving conditions or further damage to the engine.

5. How do I diagnose the P1124 code?

Use an OBDII scanner to confirm the code, then inspect the throttle position sensor, its wiring, and related connectors for damage, corrosion, or looseness. Test the TPS with a multimeter to check for proper voltage readings.

6. How do I fix the P1124 code on a 2006 Ford Fusion?

Repair steps may include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning connectors, or recalibrating the TPS if necessary.

7. How much does it cost to fix the P1124 code?

Repair costs vary, but replacing the TPS typically costs between $100 and $300, including parts and labor. Diagnosing and fixing wiring issues may add to the cost.

8. Can a dirty throttle body cause the P1124 code?

Yes, a dirty or clogged throttle body can cause issues with the throttle position sensor's readings, potentially triggering the P1124 code.

9. Does the P1124 code require reprogramming the ECU?

In most cases, reprogramming is not required. However, after replacing the TPS or throttle body, the ECU may need to relearn the new sensor's parameters.

10. What happens if I ignore the P1124 code?

Ignoring the code may lead to worsening performance issues, increased fuel consumption, and potential damage to the throttle system, making repairs more expensive over time.