AutoCodes – Subaru – P1120 Subaru

P1120 Subaru Code - Throttle Position Sensor Out Of Range

Quick Answer

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1120 Subaru indicates Throttle Position Sensor Out Of Range.
Common causes
Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 8,455
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 25, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P1120 Subaru Description

The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. This sensor is a kind of potentiometer which transforms the throttle position into output voltage, and emits the voltage signal to the Engine Control Module (ECM). In addition, the sensor detects the opening and closing speed of the throttle valve and feeds the voltage signal to the ECM.
OBDII Code P1120 Subaru - Throttle Position Sensor Out Of Range - AutoCodes.com
P1120 Subaru Code - Throttle Position Sensor Out Of Range

What are the Possible Causes of the DTC P1120 Subaru?

  • Faulty throttle position sensor
  • Throttle position sensor harness is open or shorted
  • Throttle position sensor circuit poor electrical connection
  • Throttle position sensor not properly adjusted

How to Fix the DTC P1120 Subaru?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1120 Subaru code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1120 Subaru code?

Need more information on how to fix the P1120 Subaru code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1120 Subaru code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1120 Subaru Code

1. What does the OBDII code P1120 mean on a Subaru?

P1120 indicates that the throttle position sensor (TPS) is reading values that are outside the expected range.

2. What are the common symptoms of code P1120 in a Subaru?

Symptoms include poor acceleration, rough idling, stalling, reduced fuel efficiency, and the check engine light turning on.

3. What causes the P1120 code to appear on a Subaru?

Common causes include a faulty throttle position sensor, damaged wiring or connectors, or a misaligned throttle body.

4. Can I drive my Subaru with a P1120 code?

Driving with a P1120 code is not recommended, as it can lead to performance issues and unsafe driving conditions.

5. How do I fix the P1120 code on a Subaru?

Repairs may involve replacing the throttle position sensor, repairing damaged wiring, or recalibrating the throttle body.

6. How much does it cost to fix a P1120 code on a Subaru?

The cost varies but typically ranges from $100 to $300, depending on whether the sensor needs replacement or minor wiring repairs are required.

7. How do I test the throttle position sensor for a P1120 code?

You can use a multimeter to check the sensor's voltage output while manually moving the throttle to ensure it stays within the expected range.

8. Can a dirty throttle body cause the P1120 code?

Yes, a dirty or clogged throttle body can lead to misreadings and trigger the code.

9. Will clearing the P1120 code fix the issue permanently?

Clearing the code will only reset the check engine light temporarily; the underlying issue must be addressed to prevent it from returning.

10. Is the P1120 code specific to Subaru vehicles?

While P1120 can appear on other vehicles, the specific meaning and troubleshooting steps may vary by manufacturer.

Discuss the causes and fixes for P1120 Subaru OBDII Code

Code P1120 Subaru comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play