P1119 Hyundai Code - Inlet Metering Valve Control
Quick Answer
P1119 Hyundai indicates Inlet Metering Valve Control. Common causes for P1119 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1119 Hyundai indicates Inlet Metering Valve Control.
- Common causes
- Common causes for P1119 Hyundai include wiring or connector problems, a faulty related sensor or actuator, and control module or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1119 Hyundai Description
How to Fix the DTC P1119 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1119 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1119 Hyundai code?
Need more information on how to fix the P1119 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1119 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1119 Hyundai Code
1. What does the OBDII code P1119 mean on a Hyundai?
P1119 indicates an issue with the Inlet Metering Valve Control, which regulates fuel delivery to the engine.
2. What are the common symptoms of the P1119 code on a Hyundai?
Symptoms include rough idling, reduced engine performance, stalling, and poor fuel efficiency.
3. What causes the P1119 code on a Hyundai?
Common causes include a faulty inlet metering valve, wiring issues, damaged connectors, or a malfunctioning fuel pump.
4. Can I drive my Hyundai with the P1119 code active?
It’s not recommended, as driving with this code can cause further damage to the engine or fuel system components.
5. How do I diagnose the P1119 code on a Hyundai?
Diagnosis involves checking the inlet metering valve, inspecting wiring and connectors, and testing the fuel pressure.
6. How do you fix the P1119 code on a Hyundai?
Repairs may include replacing the inlet metering valve, repairing damaged wiring, or replacing the fuel pump if necessary.
7. How much does it cost to repair the P1119 code on a Hyundai?
The cost depends on the exact issue but typically ranges from $150 to $600, including parts and labor.
8. Can a dirty fuel filter cause the P1119 code on a Hyundai?
A dirty fuel filter can restrict fuel flow, indirectly contributing to issues tied to the inlet metering valve.
9. Will clearing the P1119 code fix the problem permanently?
Clearing the code will remove it temporarily, but the underlying issue must be addressed to prevent it from returning.
10. What tools are needed to troubleshoot the P1119 code on a Hyundai?
You’ll need an OBDII scanner, multimeter, and possibly a fuel pressure gauge for thorough diagnostics.
Discuss the causes and fixes for P1119 Hyundai OBDII Code
Code P1119 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
