AutoCodes – Honda – P1111 Honda

P1111 Honda Code - Intake Air Temperature Sensor Circuit Intermittent High Voltage

Quick Answer

The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes resistance based on temperature (a thermistor). Common causes include Faulty Intake Air Temperature Sensor, Intake Air Temperature Sensor harness is open or shorted, Intake Air Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1111 Honda indicates Intake Air Temperature Sensor Circuit Intermittent High Voltage.
Common causes: Common causes include Faulty Intake Air Temperature Sensor, Intake Air Temperature Sensor harness is open or shorted, Intake Air Temperature Sensor circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,146

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 19, 2019

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1111 Honda Description

The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes resistance based on temperature (a thermistor). The IAT sensor mounts in the air intake passage of the engine air induction system. The IAT sensor has a signal circuit and a ground circuit. The Powertrain Control Module (PCM) applies a voltage (about 5.0 volts) on the signal circuit to the sensor. The PCM monitors changes in this voltage caused by changes in the resistance of the sensor in order to determine the intake air temperature.
When the intake air is cold, the sensor (thermistor) resistance is high, and the PCMs signal voltage is only pulled down a small amount through the sensor to ground. The PCM senses a high signal voltage (low temperature). When the intake air is warm, the sensor resistance is low, and the signal voltage is pulled down a greater amount. This causes the PCM to sense a low signal voltage (high temperature).

OBDII Code P1111 Honda - Intake Air Temperature Sensor Circuit Intermittent High Voltage - AutoCodes.com — P1111 Honda Code - Intake Air Temperature Sensor Circuit Intermittent High Voltage

What does this mean?

What are the Possible Causes of the DTC P1111 Honda?

Faulty Intake Air Temperature Sensor
Intake Air Temperature Sensor harness is open or shorted
Intake Air Temperature Sensor circuit poor electrical connection

How to Fix the DTC P1111 Honda?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1111 Honda code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1111 Honda code?

Need more information on how to fix the P1111 Honda code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1111 Honda code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.