P1111 2005 Nissan Altima Sedan Code - Intake Valve Timing Control Solenoid Valve Circuit Bank 1
Quick Answer
The intake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the Engine Control Module (ECM). Common causes include Faulty Intake Valve Timing Control Solenoid Valve Bank 1, Intake Valve Timing Control Solenoid Valve Bank 1 harness is open or shorted, Intake Valve Timing Control Solenoid Valve Bank 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1111 2005 Nissan Altima Sedan indicates Intake Valve Timing Control Solenoid Valve Circuit Bank 1.
- Common causes
- Common causes include Faulty Intake Valve Timing Control Solenoid Valve Bank 1, Intake Valve Timing Control Solenoid Valve Bank 1 harness is open or shorted, Intake Valve Timing Control Solenoid Valve Bank 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1111 2005 Nissan Altima Sedan Description
The longer pulse width advances the valve angle. The shorter pulse width retards the valve angle.
When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
The Diagnostic Trouble Code (DTC) when an improper voltage is sent to the ECM through the intake valve timing control solenoid valve.
What are the Possible Causes of the DTC P1111 2005 Nissan Altima Sedan?
- Faulty Intake Valve Timing Control Solenoid Valve Bank 1
- Intake Valve Timing Control Solenoid Valve Bank 1 harness is open or shorted
- Intake Valve Timing Control Solenoid Valve Bank 1 circuit poor electrical connection
How to Fix the DTC P1111 2005 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1111 2005 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1111 2005 Nissan Altima Sedan code?
Need more information on how to fix the P1111 2005 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1111 2005 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1111 2005 Nissan Altima Sedan Code
1. What are common symptoms of OBDII code P1111 on a 2005 Nissan Altima Sedan?
- Common symptoms include rough idling, engine misfires, decreased fuel efficiency, and possible stalling.
2. What does the OBDII code P1111 indicate in a 2005 Nissan Altima Sedan?
- OBDII code P1111 indicates an issue with the Intake Valve Timing Control Solenoid Valve Circuit Bank 1.
3. What are the possible causes of OBDII code P1111 on a 2005 Nissan Altima Sedan?
- Possible causes include a faulty intake valve timing control solenoid, damaged wiring or connectors, or a malfunctioning engine control module (ECM).
4. How can I diagnose the Intake Valve Timing Control Solenoid Valve Circuit issue on my 2005 Nissan Altima Sedan?
- Diagnosis involves using an OBDII scanner to retrieve the fault code, inspecting the wiring and connectors for damage, and testing the intake valve timing control solenoid for proper function.
5. Can I continue driving my 2005 Nissan Altima Sedan with OBDII code P1111?
- It is not recommended to continue driving with this code present, as it can lead to further engine performance issues and potential damage if left unresolved.
6. How can I repair OBDII code P1111 on my 2005 Nissan Altima Sedan?
- Repair may involve replacing the intake valve timing control solenoid, repairing or replacing damaged wiring or connectors, or reprogramming the ECM if necessary.
7. Is it possible to reset OBDII code P1111 on a 2005 Nissan Altima Sedan without fixing the issue?
- While clearing the code may temporarily turn off the check engine light, the underlying problem causing the fault code will persist until properly addressed.
8. Can a DIY enthusiast fix OBDII code P1111 on a 2005 Nissan Altima Sedan?
- Depending on the DIYer's skills and knowledge, it may be possible to replace the intake valve timing control solenoid or perform basic wiring repairs. More complex issues may require professional assistance.
9. How much does it typically cost to repair OBDII code P1111 on a 2005 Nissan Altima Sedan?
- The cost of repair can vary depending on the specific issue, with parts such as the solenoid valve costing around $100-$200, and labor costs varying based on repair shop rates.
10. Can a routine maintenance schedule help prevent OBDII code P1111 on a 2005 Nissan Altima Sedan?
- Regular maintenance, including timely oil changes and following the manufacturer's recommended service intervals, can help prevent issues that may trigger the P1111 fault code.
Discuss the causes and fixes for P1111 2005 Nissan Altima Sedan OBDII Code
Code P1111 2005 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
