AutoCodes – Honda – P1107 1997 Honda Civic

P1107 1997 Honda Civic Code - Barometric Pressure Sensor Circuit Low Voltage

Quick Answer

The Barometric Pressure (BARO) sensor is built into the Engine Control Module (ECM) and monitors atmospheric pressure. Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1107 1997 Honda Civic indicates Barometric Pressure Sensor Circuit Low Voltage.
Common causes: Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM).
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,600

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Apr 19, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1107 1997 Honda Civic Description

The Barometric Pressure (BARO) sensor is built into the Engine Control Module (ECM) and monitors atmospheric pressure. The ECM estimates appropriate intake airflow from the Manifold Absolute Pressure (MAP) sensor output voltage and BARO sensor output voltage. If the BARO sensor output voltage is a specified value or more, the ECM detects a malfunction and a code is stored.

OBDII Code P1107 1997 Honda Civic - Barometric Pressure Sensor Circuit Low Voltage - AutoCodes.com — P1107 1997 Honda Civic Code - Barometric Pressure Sensor Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P1107 1997 Honda Civic?

Engine Control Module (ECM) outdated or incorrect software
Faulty Engine Control Module (ECM)

How to Fix the DTC P1107 1997 Honda Civic?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1107 1997 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1107 1997 Honda Civic code?

Need more information on how to fix the P1107 1997 Honda Civic code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1107 1997 Honda Civic code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1107 1997 Honda Civic Code

1. What are the common symptoms of OBDII code P1107 on a 1997 Honda Civic?

- Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and possible stalling.

2. What does the OBDII code P1107 for a 1997 Honda Civic indicate?

- The code P1107 indicates a low voltage condition in the Barometric Pressure Sensor circuit.

3. What are the potential causes of OBDII code P1107 on a 1997 Honda Civic?

- Potential causes include a faulty Barometric Pressure Sensor, damaged wiring or connectors, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the cause of OBDII code P1107 on my 1997 Honda Civic?

- You can use a multimeter to test the voltage output of the Barometric Pressure Sensor, inspect the wiring for any damage, and check the ECM for proper functioning.

5. Can I drive my 1997 Honda Civic with OBDII code P1107?

- It is not recommended to drive the vehicle with code P1107 as it can lead to further engine issues and potential breakdowns.

6. How do I repair OBDII code P1107 on a 1997 Honda Civic?

- Repair involves replacing the faulty Barometric Pressure Sensor, repairing any damaged wiring or connectors, and resetting the ECM after the repair.

7. Is it possible to reset OBDII code P1107 on a 1997 Honda Civic without fixing the issue?

- Resetting the code without fixing the underlying issue will only temporarily clear the error code, but it will likely reappear once the problem persists.

8. Can a DIY enthusiast fix OBDII code P1107 on a 1997 Honda Civic?

- While some experienced DIYers may be able to diagnose and replace the Barometric Pressure Sensor, it is recommended to consult a professional mechanic for accurate diagnosis and repair.

9. How much does it cost to fix OBDII code P1107 on a 1997 Honda Civic?

- The cost of fixing code P1107 can vary depending on the root cause, but it typically ranges from $100 to $300 for parts and labor.

10. How long does it take to repair OBDII code P1107 on a 1997 Honda Civic?

- The repair time for code P1107 can vary based on the specific issue, but it generally takes between 1 to 2 hours for a mechanic to diagnose and fix the problem.