P1106 1998 Honda Civic Code - Barometric Pressure Sensor Range/Performance Problem
Quick Answer
The Barometric Pressure (BARO) sensor is built into the Engine Control Module (ECM) and monitors atmospheric pressure. Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1106 1998 Honda Civic indicates Barometric Pressure Sensor Range/Performance Problem.
- Common causes
- Common causes include Engine Control Module (ECM) outdated or incorrect software, Faulty Engine Control Module (ECM).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1106 1998 Honda Civic Description
What are the Possible Causes of the DTC P1106 1998 Honda Civic?
- Engine Control Module (ECM) outdated or incorrect software
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1106 1998 Honda Civic?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
- Clear code
- Start the engine
- Hold the engine at 3,000 rpm with no load (in Park or neutral) until the radiator fan comes on, then let it idle
- Test-drive with the A/T in 2nd position, M/T in 4th gear
- Press accelerator pedal over 1/2 way down for five seconds
- Check for codes again
- If the codes comes back ECM may need to be replace. If codes don't came back, problem is repaired.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1106 1998 Honda Civic code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1106 1998 Honda Civic code?
Need more information on how to fix the P1106 1998 Honda Civic code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1106 1998 Honda Civic code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1106 1998 Honda Civic Code
1. What does the OBDII code P1106 on a 1998 Honda Civic mean?
The code P1106 indicates a Barometric Pressure Sensor Range/Performance Problem on a 1998 Honda Civic.
2. What are the common symptoms of a Barometric Pressure Sensor issue (P1106) in a 1998 Honda Civic?
Common symptoms include rough idling, poor fuel efficiency, engine stalling, and potential difficulty starting the vehicle.
3. What are the possible causes of the P1106 code on a 1998 Honda Civic?
Possible causes include a faulty barometric pressure sensor, damaged wiring or connectors, vacuum leaks, or issues with the engine's air intake system.
4. How do I diagnose the Barometric Pressure Sensor Range/Performance Problem (P1106) on my 1998 Honda Civic?
Diagnosis typically involves using an OBDII scanner to retrieve the error code, checking the sensor's wiring and connections for damage, and testing the sensor's output using a multimeter.
5. Can I drive my 1998 Honda Civic with the P1106 code present?
It is not recommended to drive the vehicle with the P1106 code active, as it can lead to poor engine performance and potential further damage if left unresolved.
6. How can I repair the Barometric Pressure Sensor Range/Performance Problem (P1106) on my 1998 Honda Civic?
Repair options may include replacing the barometric pressure sensor, repairing damaged wiring or connectors, fixing vacuum leaks, or addressing issues in the air intake system.
7. Will resetting the OBDII code P1106 on my 1998 Honda Civic make it go away permanently?
Resetting the code may temporarily clear the error, but if the underlying issue causing the P1106 code is not fixed, it is likely to reappear.
8. Is it possible to fix the Barometric Pressure Sensor issue causing the P1106 code in a 1998 Honda Civic by cleaning the sensor?
In some cases, cleaning the sensor may help if the issue is caused by dirt or debris, but if the sensor is faulty, it will likely need to be replaced.
9. How much does it typically cost to repair the Barometric Pressure Sensor Range/Performance Problem (P1106) on a 1998 Honda Civic?
The cost of repair can vary depending on the specific issue, but it may range from around $100 to $300 for parts and labor.
10. Can a DIY enthusiast with basic automotive knowledge fix the P1106 code issue on a 1998 Honda Civic?
Depending on the cause of the issue, a DIY enthusiast may be able to address the P1106 code by replacing the sensor, checking and repairing wiring, or fixing vacuum leaks with the help of online guides or manuals.
Discuss the causes and fixes for P1106 1998 Honda Civic OBDII Code
Code P1106 1998 Honda Civic comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
