AutoCodesChevrolet – P1103 2015 Chevrolet Silverado

P1103 2015 Chevrolet Silverado Code - Water In Fuel Signal Message Counter Incorrect

Quick Answer

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Water In Fuel Sensor, Water In Fuel Sensor harness is open or shorted, Water In Fuel Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1103 2015 Chevrolet Silverado indicates Water In Fuel Signal Message Counter Incorrect.
Common causes
Common causes include Faulty Water In Fuel Sensor, Water In Fuel Sensor harness is open or shorted, Water In Fuel Sensor circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 279
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Sep 26, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1103 2015 Chevrolet Silverado Description

Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Operating information and commands are exchanged among the control modules. Each module on the serial data circuit maintains a transmit error counter and a receive error counter. The counter values increase with detected errors and decrease with error-free messages. The Diagnostic Trouble Code (DTC) will be set when the Water In Fuel Signal Message Counter is Incorrect.
OBDII Code P1103 2015 Chevrolet Silverado - Water In Fuel Signal Message Counter Incorrect - AutoCodes.com
P1103 2015 Chevrolet Silverado Code - Water In Fuel Signal Message Counter Incorrect

What are the Possible Causes of the DTC P1103 2015 Chevrolet Silverado?

  • Faulty Water In Fuel Sensor
  • Water In Fuel Sensor harness is open or shorted
  • Water In Fuel Sensor circuit poor electrical connection

How to Fix the DTC P1103 2015 Chevrolet Silverado?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1103 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1103 2015 Chevrolet Silverado code?

Need more information on how to fix the P1103 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1103 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1103 2015 Chevrolet Silverado Code

1. What does the OBDII code P1103 mean on a 2015 Chevrolet Silverado?

Code P1103 indicates that the Water In Fuel (WIF) sensor has detected an incorrect or erratic signal, likely related to moisture in the fuel system.

2. What are the common symptoms of P1103 on a 2015 Chevrolet Silverado?

Symptoms may include a "Water in Fuel" warning message, reduced engine performance, rough idling, or difficulty starting the engine.

3. What causes the P1103 code on a 2015 Chevrolet Silverado?

Common causes include water contamination in the fuel, a faulty WIF sensor, damaged wiring or connectors, or a failed fuel filter housing.

4. Can driving with the P1103 code damage my engine?

Yes, driving with water-contaminated fuel can cause serious damage to the fuel injectors, fuel pump, and other engine components.

5. How do I fix the P1103 code on my 2015 Chevrolet Silverado?

Start by draining the water from the fuel separator, inspecting the WIF sensor and wiring for damage, and replacing the fuel filter if necessary.

6. How do I know if the WIF sensor is faulty for code P1103?

If the sensor gives an erratic or constant warning despite draining the fuel system, it may need to be tested or replaced.

7. How often should I check for water in the fuel system to prevent P1103?

It’s recommended to check for water during regular fuel filter maintenance or if driving in areas with poor fuel quality.

8. What tools are needed to diagnose and repair the P1103 code?

You’ll need an OBDII scanner to read the code, a wrench to access the fuel filter, and a multimeter to test the WIF sensor and wiring.

9. Can bad fuel quality cause the P1103 code?

Yes, low-quality or contaminated fuel is a common cause of water in the fuel system, which may trigger the P1103 code.

10. Is it expensive to fix the P1103 code on a 2015 Chevrolet Silverado?

Repair costs vary but can range from a simple fuel filter replacement to more expensive repairs if the WIF sensor or other components are damaged.

Discuss the causes and fixes for P1103 2015 Chevrolet Silverado OBDII Code

Code P1103 2015 Chevrolet Silverado comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play