P1102 Hyundai Code - Manifold Absolute Pressure Sensor Malfunction - Low Voltage
Quick Answer
P1102 Hyundai indicates Manifold Absolute Pressure Sensor Malfunction - Low Voltage. Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1102 Hyundai indicates Manifold Absolute Pressure Sensor Malfunction - Low Voltage.
- Common causes
- Common causes include Faulty Manifold Absolute Pressure (MAP) Sensor, Manifold Absolute Pressure Sensor harness is open or shorted, Manifold Absolute Pressure Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1102 Hyundai Description
What are the Possible Causes of the DTC P1102 Hyundai?
- Faulty Manifold Absolute Pressure (MAP) Sensor
- Manifold Absolute Pressure Sensor harness is open or shorted
- Manifold Absolute Pressure Sensor circuit poor electrical connection
How to Fix the DTC P1102 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1102 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1102 Hyundai code?
Need more information on how to fix the P1102 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1102 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1102 Hyundai Code
1. What does the OBDII code P1102 mean in a Hyundai?
P1102 indicates a "Manifold Absolute Pressure Sensor Malfunction - Low Voltage," meaning the sensor is detecting a voltage level below the expected range.
2. What are the common symptoms of a P1102 code in a Hyundai?
Symptoms may include poor engine performance, reduced fuel efficiency, rough idling, hesitation during acceleration, and the check engine light turning on.
3. What causes the P1102 code to appear in a Hyundai vehicle?
Common causes include a faulty MAP sensor, damaged or corroded wiring or connectors, vacuum leaks, or a malfunctioning engine control module (ECM).
4. Can I drive my Hyundai with the P1102 code active?
While it may be possible to drive with this code, it is not recommended as it can lead to poor fuel efficiency, increased emissions, and potential engine damage over time.
5. How can I diagnose the P1102 code in my Hyundai?
Start by checking the MAP sensor and its wiring for visible damage or corrosion. Use a multimeter to test the sensor voltage and compare it to manufacturer specifications.
6. How do I fix the P1102 code in my Hyundai?
Repairs may include replacing the MAP sensor, repairing damaged wiring or connectors, fixing vacuum leaks, or reprogramming the ECM if necessary.
7. What tools are needed to troubleshoot and repair the P1102 code on a Hyundai?
You’ll typically need an OBDII scanner, a multimeter, and basic tools to inspect and replace the MAP sensor or repair wiring.
8. How much does it cost to fix a P1102 code in a Hyundai?
The cost depends on the issue. Replacing a MAP sensor typically costs $100–$300, including parts and labor. Wiring repairs or ECM reprogramming costs vary.
9. Can a dirty air filter cause the P1102 code in a Hyundai?
A clogged air filter may not directly cause P1102, but it can affect the MAP sensor readings by restricting airflow, which may lead to related issues.
10. Is it necessary to clear the P1102 code after repairs?
Yes, after completing repairs, use an OBDII scanner to clear the code and verify that it doesn’t return during a test drive.
Discuss the causes and fixes for P1102 Hyundai OBDII Code
Code P1102 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
