AutoCodes – GMC – P1101 2017 GMC Sierra

P1101 2017 GMC Sierra Code - Intake Air Flow System Performance

Quick Answer

The Mass Air Flow (MAF) Sensor is integrated with the Intake Air Temperature (IAT) sensor. Common causes include Air leak between the Mass Air Flow (MAF) sensor and Throttle Body, Restricted Air Filter, Dirty Throttle Body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1101 2017 GMC Sierra indicates Intake Air Flow System Performance.
Common causes: Common causes include Air leak between the Mass Air Flow (MAF) sensor and Throttle Body, Restricted Air Filter, Dirty Throttle Body.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 223

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 16, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1101 2017 GMC Sierra Description

The Mass Air Flow (MAF) Sensor is integrated with the Intake Air Temperature (IAT) sensor. The MAF sensor is an air flow meter that measures the amount of air entering the engine. The MAF sensor used on this engine is a voltage-based sensor. The greater the airflow, the greater the voltage signal. The Engine Control Module (ECM) uses the MAF sensor signal to provide the correct fuel delivery for all engine speeds and loads. The Diagnostic Trouble Code (DTC) will be set if the ECM detects that the measured MAF is not within a calibrated range of the model for greater than 2 seconds.

OBDII Code P1101 2017 GMC Sierra - Intake Air Flow System Performance - AutoCodes.com — P1101 2017 GMC Sierra Code - Intake Air Flow System Performance

What does this mean?

What are the Possible Causes of the DTC P1101 2017 GMC Sierra?

Air leak between the Mass Air Flow (MAF) sensor and Throttle Body
Restricted Air Filter
Dirty Throttle Body
Dirty Mass Air Flow sensor
Faulty Mass Air Flow Sensor
Mass Air Flow Sensor harness is open or shorted
Mass Air Flow Sensor circuit poor electrical connection

How to Fix the DTC P1101 2017 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1101 2017 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1101 2017 GMC Sierra code?

Need more information on how to fix the P1101 2017 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1101 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1101 2017 GMC Sierra Code

1. What does the OBDII code P1101 mean on a 2017 GMC Sierra?

P1101 indicates an issue with the Intake Air Flow System Performance, which means the airflow measured by the Mass Airflow (MAF) sensor is outside the expected range.

2. What are common symptoms of the P1101 code on a 2017 GMC Sierra?

Symptoms may include a check engine light, reduced engine performance, rough idling, poor acceleration, or decreased fuel efficiency.

3. What causes the P1101 code on a 2017 GMC Sierra?

Common causes include a dirty or faulty MAF sensor, air intake system leaks, a clogged air filter, or throttle body carbon buildup.

4. Can a dirty air filter trigger the P1101 code?

Yes, a clogged or dirty air filter can restrict airflow and cause the P1101 code to appear.

5. How do I diagnose the P1101 code on my 2017 GMC Sierra?

Start by inspecting the air filter, air intake system, and MAF sensor for dirt or damage. Use a scan tool to monitor live data from the MAF sensor and compare it to manufacturer specifications.

6. Is a faulty MAF sensor a common reason for the P1101 code?

Yes, a faulty or dirty MAF sensor is one of the most common reasons for this code and should be inspected and cleaned or replaced if necessary.

7. Can a vacuum leak cause the P1101 code on a 2017 GMC Sierra?

Yes, vacuum leaks can disrupt the air-to-fuel ratio, leading to incorrect airflow readings and triggering the P1101 code.

8. How can I fix the P1101 code on my 2017 GMC Sierra?

Common fixes include cleaning or replacing the MAF sensor, replacing the air filter, inspecting and sealing any leaks in the intake system, and cleaning the throttle body.

9. Can I drive my 2017 GMC Sierra with the P1101 code?

While it may still be drivable, driving with this code can lead to reduced performance and potential damage to the engine if left unresolved.

10. How much does it cost to fix the P1101 code on a 2017 GMC Sierra?

Repair costs vary depending on the issue, but cleaning a MAF sensor or replacing an air filter is relatively inexpensive, while fixing intake leaks or replacing a MAF sensor may cost more, typically between $100 and $400.