P1048 GMC Code - Reductant Injector High Control Circuit Low Voltage
Quick Answer
The Reductant Injector is a component of selective catalytic reduction system used to dose the reductant fluid to the exhaust gas and participate in the reduction reactions. Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1048 GMC indicates Reductant Injector High Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty Reductant Injector, Reductant Injector harness is open or shorted, Reductant Injector circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1048 GMC Description
What are the Possible Causes of the DTC P1048 GMC?
- Faulty Reductant Injector
- Reductant Injector harness is open or shorted
- Reductant Injector circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P1048 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1048 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1048 GMC code?
Need more information on how to fix the P1048 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1048 GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P1048 2014 GMC Sierra — Reductant Injector High Control Circuit Low Voltage
- P1048 2015 GMC Sierra — Reductant Injector High Control Circuit Low Voltage
- P1048 2016 GMC Sierra — Reductant Injector High Control Circuit Low Voltage
- P1048 2017 GMC Sierra — Reductant Injector High Control Circuit Low Voltage
- P1048 2018 GMC Sierra — Reductant Injector High Control Circuit Low Voltage
Frequently Asked Questions about P1048 GMC Code
1. What are the common symptoms of OBDII code P1048 GMC (Reductant Injector High Control Circuit Low Voltage)?
The common symptoms include the Check Engine Light coming on, reduced engine performance, poor fuel efficiency, and potential exhaust emissions issues.
2. What are the possible causes of OBDII code P1048 GMC?
Possible causes may include a faulty reductant injector, wiring issues in the control circuit, a malfunctioning powertrain control module (PCM), or a poor electrical connection.
3. How can I diagnose OBDII code P1048 GMC?
Diagnosis typically involves using a scan tool to read the code, checking the reductant injector and related wiring for visible damage, and testing the electrical components with a multimeter for proper voltage.
4. Can I continue driving my vehicle with OBDII code P1048 GMC?
It is not recommended to continue driving with this code present, as it can lead to further engine damage or emission problems. It's best to address the issue promptly.
5. How can I repair OBDII code P1048 GMC?
Repairing this code may involve replacing the faulty reductant injector, repairing or replacing damaged wiring, ensuring proper electrical connections, or resetting the PCM after fixing the issue.
6. Is it possible to clear OBDII code P1048 GMC without fixing the underlying problem?
While you can clear the code with a scan tool, it will likely reappear if the underlying issue is not addressed. It's important to fix the problem to prevent further issues.
7. Can a DIY enthusiast repair OBDII code P1048 GMC at home?
Depending on your mechanical skills and access to tools, you may be able to repair this code at home. However, dealing with electrical components and the reductant system may require some expertise.
8. Will OBDII code P1048 GMC cause my vehicle to fail an emissions test?
Yes, this code can cause your vehicle to fail an emissions test due to potential issues with the reductant system, which helps control emissions.
9. How much does it cost to repair OBDII code P1048 GMC at a mechanic?
The cost of repairing this code can vary depending on the exact cause of the issue, but it may range from $200 to $500 or more, including parts and labor.
10. How long does it typically take to repair OBDII code P1048 GMC?
The repair time for this code can vary based on the extent of the issue and the availability of parts. It may take a few hours to a full day for a mechanic to diagnose and fix the problem.
Discuss the causes and fixes for P1048 GMC OBDII Code
Code P1048 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
