P1037 Audi Code - Nitrogen Oxides Sensor Short To Ground
Quick Answer
The Engine Control Module (ECM) monitors the Nitrogen Oxides (NOx) Sensor. Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1037 Audi indicates Nitrogen Oxides Sensor Short To Ground.
- Common causes
- Common causes include Faulty Nitrogen Oxides (NOx) Sensor, Nitrogen Oxides Sensor harness is open or shorted, Nitrogen Oxides Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1037 Audi Description
What are the Possible Causes of the DTC P1037 Audi?
- Faulty Nitrogen Oxides (NOx) Sensor
- Nitrogen Oxides Sensor harness is open or shorted
- Nitrogen Oxides Sensor circuit poor electrical connection
How to Fix the DTC P1037 Audi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1037 Audi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1037 Audi code?
Need more information on how to fix the P1037 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1037 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1037 Audi Code
1. What does the OBDII code P1037 mean on an Audi?
P1037 indicates a short-to-ground issue with the nitrogen oxides (NOx) sensor, which monitors NOx emissions in the exhaust system.
2. What are common symptoms of code P1037 on an Audi?
Symptoms may include poor engine performance, increased emissions, illuminated check engine light, and decreased fuel efficiency.
3. What causes the P1037 code on an Audi?
Possible causes include damaged wiring or connectors for the NOx sensor, a faulty NOx sensor, or issues with the engine control module (ECM).
4. Can I drive my Audi with the P1037 code?
Driving with this code is not recommended as it may lead to increased emissions and potential engine performance issues.
5. How do I diagnose the P1037 code on an Audi?
Diagnosis involves inspecting the NOx sensor wiring and connectors for damage, testing the sensor itself, and checking for related ECM faults.
6. How can I fix the P1037 code on my Audi?
Repairs may include replacing damaged wiring, repairing or replacing the NOx sensor, or addressing ECM-related issues.
7. How much does it cost to fix the P1037 code on an Audi?
Repair costs vary but may range from $200 to $500 for sensor replacement, depending on labor and parts prices.
8. Can a dirty NOx sensor cause the P1037 code?
While rare, contamination or buildup on the NOx sensor could contribute to sensor failure or signal issues.
9. Will resetting the check engine light clear the P1037 code?
Resetting the light may temporarily clear the code, but the underlying issue must be resolved to prevent it from returning.
10. Is the P1037 code specific to Audi vehicles?
No, this code can appear on other vehicles equipped with NOx sensors, but Audi-specific diagnostics and repairs may be needed.
Discuss the causes and fixes for P1037 Audi OBDII Code
Code P1037 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
