P1018 GMC Code - Reductant Control Module Sensor Communication Voltage Supply Circuit Low Voltage
Quick Answer
The Reductant Quality Sensor is located in the reductant tank and uses an ultrasonic signal to measure reductant fluid quality. Common causes include Faulty Reductant Control Module, Reductant Control Module harness is open or shorted, Reductant Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1018 GMC indicates Reductant Control Module Sensor Communication Voltage Supply Circuit Low Voltage.
- Common causes
- Common causes include Faulty Reductant Control Module, Reductant Control Module harness is open or shorted, Reductant Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1018 GMC Description
What are the Possible Causes of the DTC P1018 GMC?
- Faulty Reductant Control Module
- Reductant Control Module harness is open or shorted
- Reductant Control Module circuit poor electrical connection
- Faulty Reductant Quality Sensor
How to Fix the DTC P1018 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1018 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1018 GMC code?
Need more information on how to fix the P1018 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1018 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1018 GMC Code
1. What are common symptoms of OBDII code P1018 GMC?
- Common symptoms of P1018 GMC may include illuminated Check Engine light, reduced engine performance, and potential issues with the vehicle's emissions system.
2. What can cause the Reductant Control Module Sensor Communication Voltage Supply Circuit Low Voltage code?
- The P1018 code is typically triggered by issues such as a faulty reductant control module, damaged wiring or connectors, or a weak electrical connection in the sensor communication circuit.
3. How can I diagnose the cause of OBDII code P1018 GMC?
- Diagnosing the P1018 code involves using an OBDII scanner to retrieve the specific fault code, inspecting the wiring and connectors for any damage, and testing the voltage supply to the reductant control module sensor.
4. Are there any quick repair tips for fixing code P1018 GMC?
- Quick repair tips for resolving P1018 GMC may include checking and repairing any damaged wiring or connectors, ensuring a secure electrical connection, and resetting the fault code with an OBDII scanner after making repairs.
5. Can driving with OBDII code P1018 GMC cause further damage to my vehicle?
- Continuing to drive with the P1018 code may lead to reduced fuel efficiency, increased emissions, and potential damage to the vehicle's emissions control system over time. It is recommended to address the issue promptly.
6. Is it safe to clear the P1018 GMC fault code without fixing the underlying issue?
- Clearing the fault code without addressing the root cause may temporarily turn off the Check Engine light, but the issue will likely reoccur. It is essential to diagnose and repair the problem to prevent further complications.
7. How much does it typically cost to repair OBDII code P1018 GMC?
- The cost of repairing P1018 GMC can vary depending on the specific cause of the issue, the extent of the repair needed, and labor rates. It is advisable to consult a professional mechanic for an accurate estimate.
8. Can a DIY enthusiast fix OBDII code P1018 GMC at home?
- DIY enthusiasts with automotive repair knowledge and the necessary tools may be able to diagnose and repair P1018 GMC at home. However, it is crucial to have a clear understanding of the diagnostic process and follow proper repair procedures.
9. Will OBDII code P1018 GMC cause my vehicle to fail emissions testing?
- Vehicles with the P1018 code may fail emissions testing due to increased emissions levels. It is recommended to address the issue promptly to ensure compliance with emissions regulations.
10. How long does it take to repair OBDII code P1018 GMC?
- The time taken to repair P1018 GMC can vary depending on the complexity of the issue, availability of parts, and the expertise of the mechanic. Simple fixes like repairing wiring may take less time, while more involved repairs could require additional hours.
Discuss the causes and fixes for P1018 GMC OBDII Code
Code P1018 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
