P1017 GMC Code - Reductant Control Module Sensor Serial Communication Circuit Performance
Quick Answer
The Reductant Quality Sensor is located in the reductant tank and uses an ultrasonic signal to measure reductant fluid quality. Common causes include Faulty Reductant Control Module, Reductant Control Module harness is open or shorted, Reductant Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1017 GMC indicates Reductant Control Module Sensor Serial Communication Circuit Performance.
- Common causes
- Common causes include Faulty Reductant Control Module, Reductant Control Module harness is open or shorted, Reductant Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1017 GMC Description
What are the Possible Causes of the DTC P1017 GMC?
- Faulty Reductant Control Module
- Reductant Control Module harness is open or shorted
- Reductant Control Module circuit poor electrical connection
- Faulty Reductant Quality Sensor
How to Fix the DTC P1017 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1017 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1017 GMC code?
Need more information on how to fix the P1017 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1017 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1017 GMC Code
1. What are the common symptoms of OBDII code P1017 GMC?
The common symptoms of code P1017 GMC may include reduced engine performance, increased fuel consumption, rough idling, and the illumination of the check engine light.
2. What can cause the OBDII code P1017 GMC to appear?
The code P1017 GMC typically appears due to issues with the reductant control module sensor serial communication circuit. This can be caused by wiring faults, sensor malfunctions, or module defects.
3. How can I diagnose the OBDII code P1017 GMC?
To diagnose the code P1017 GMC, a thorough inspection of the reductant control module, sensor connections, and wiring is required. Using a diagnostic scanner to read live data and perform circuit tests can help pinpoint the issue.
4. Can I continue driving with OBDII code P1017 GMC present?
It is not recommended to continue driving with the OBDII code P1017 GMC present, as it can lead to reduced engine efficiency and potential damage to the emissions control system. It is best to address the issue promptly.
5. How can I repair OBDII code P1017 GMC?
Repairing code P1017 GMC involves identifying and fixing the underlying issue with the reductant control module sensor serial communication circuit. This may involve repairing or replacing wiring, sensors, or the control module itself.
6. Is it possible to reset OBDII code P1017 GMC without fixing the issue?
While it is possible to clear the code temporarily using a diagnostic scanner, the underlying issue causing code P1017 GMC will persist unless repaired. It is important to address the root cause of the problem to prevent further issues.
7. Can a DIY enthusiast fix OBDII code P1017 GMC?
Depending on the individual's skill level and access to tools, a DIY enthusiast may be able to diagnose and repair OBDII code P1017 GMC. However, dealing with electrical components and sensors requires caution and proper knowledge.
8. How long does it take to repair OBDII code P1017 GMC?
The time to repair code P1017 GMC can vary depending on the exact cause of the issue and the complexity of the repair. It may take anywhere from a few hours to a full day to diagnose and fix the problem.
9. Will OBDII code P1017 GMC cause my vehicle to fail emissions testing?
OBDII code P1017 GMC is related to the emissions control system, and if left unresolved, it can cause your vehicle to fail emissions testing. It is important to address the issue promptly to ensure compliance.
10. Are there any preventive measures to avoid OBDII code P1017 GMC?
Regular maintenance of the emissions control system, including checking sensor connections and wiring, can help prevent issues like code P1017 GMC. Keeping up with scheduled inspections and servicing can also help catch potential problems early.
Discuss the causes and fixes for P1017 GMC OBDII Code
Code P1017 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
