AutoCodes – MINI – P1014 MINI

P1014 MINI Code - Valvetronic Reference Eccentric Shaft Sensor Parity Error

Quick Answer

The Valvetronic System is a variable valve lift system that, in combination with variable valve timing, allows infinite adjustment of the intake valve timing and duration. Common causes include Reluctor on Valvetronic Eccentric Shaft Sensor poor installation, Faulty Valvetronic Eccentric Shaft Sensor, Valvetronic Eccentric Shaft Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P1014 MINI indicates Valvetronic Reference Eccentric Shaft Sensor Parity Error.
Common causes: Common causes include Reluctor on Valvetronic Eccentric Shaft Sensor poor installation, Faulty Valvetronic Eccentric Shaft Sensor, Valvetronic Eccentric Shaft Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,884

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 17, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P1014 MINI Description

The Valvetronic System is a variable valve lift system that, in combination with variable valve timing, allows infinite adjustment of the intake valve timing and duration. The system helps improve fuel economy and emissions and negates the need for a throttle body in regular use. The Eccentric Shaft Position Sensor is used as a feedback for the Valvetronic Eccentric Shaft. The Valvetronic Eccentric Shaft is actuated by Valvetronic Motor and in return controls the variable intake valve lift. The Eccentric Shaft Sensor is mounted to the cylinder head beneath the valve cover. The Diagnostic Trouble Code (DTC) will set if the Valvetronic Eccentric Shaft Sensor is not to factory specifications.

OBDII Code P1014 MINI - Valvetronic Reference Eccentric Shaft Sensor Parity Error - AutoCodes.com — P1014 MINI Code - Valvetronic Reference Eccentric Shaft Sensor Parity Error

What does this mean?

What are the Possible Causes of the DTC P1014 MINI?

Reluctor on Valvetronic Eccentric Shaft Sensor poor installation
Faulty Valvetronic Eccentric Shaft Sensor
Valvetronic Eccentric Shaft Sensor harness is open or shorted
Valvetronic Eccentric Shaft Sensor circuit poor electrical connection

How to Fix the DTC P1014 MINI?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P1014 MINI code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P1014 MINI code?

Need more information on how to fix the P1014 MINI code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1014 MINI code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1014 MINI Code

1. What are the common symptoms of OBDII code P1014 in a MINI related to the Valvetronic Reference Eccentric Shaft Sensor Parity Error?

- Common symptoms include rough idling, loss of power, and difficulty starting the engine.

2. What typically causes the OBDII code P1014 in a MINI?

- The code is usually triggered by a faulty Valvetronic reference eccentric shaft sensor or issues with the sensor's wiring.

3. How can I diagnose the Valvetronic Reference Eccentric Shaft Sensor Parity Error in my MINI?

- Diagnosing the issue involves using an OBDII scanner to retrieve the specific fault code and then inspecting the sensor and its wiring for any visible damage.

4. What is the recommended repair for OBDII code P1014 in a MINI?

- The recommended repair involves replacing the faulty Valvetronic reference eccentric shaft sensor and addressing any wiring issues.

5. Can I drive my MINI with the OBDII code P1014 present?

- It is not recommended to drive your MINI with the P1014 code as it can lead to further damage and potentially unsafe driving conditions.

6. Are there any DIY tips for fixing the Valvetronic Reference Eccentric Shaft Sensor Parity Error in a MINI?

- While some may attempt to replace the sensor themselves, it is recommended to seek professional help to ensure proper diagnosis and repair.

7. How long does it typically take to repair the OBDII code P1014 in a MINI?

- The repair process can vary depending on the extent of the issue, but it generally takes a few hours to replace the sensor and address any wiring problems.

8. Can a faulty Valvetronic reference eccentric shaft sensor cause other problems in a MINI?

- Yes, a faulty sensor can lead to poor engine performance, decreased fuel efficiency, and potential damage to other components if left unrepaired.

9. Is resetting the OBDII code P1014 sufficient to fix the issue in a MINI?

- Simply resetting the code will not fix the underlying problem; it is essential to diagnose and address the root cause of the Valvetronic reference eccentric shaft sensor error.

10. How much does it cost to repair the Valvetronic Reference Eccentric Shaft Sensor Parity Error in a MINI?

- Repair costs can vary depending on the labor rates and parts prices, but replacing the sensor and addressing wiring issues can typically range from $300 to $700.