P1011 GMC Code - Intake Camshaft Position Actuator Park Position Bank 1
Quick Answer
The Camshaft Position (CMP) actuator system enables the Engine Control Module (ECM) to change the camshaft timing of all 4 camshafts while the engine is operating. Common causes include Low engine oil level, Low engine oil pressure, Faulty Intake Camshaft Position Actuator Bank 1. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1011 GMC indicates Intake Camshaft Position Actuator Park Position Bank 1.
- Common causes
- Common causes include Low engine oil level, Low engine oil pressure, Faulty Intake Camshaft Position Actuator Bank 1.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1011 GMC Description
The CMP actuator assemblies have an outer housing that is driven by the engine timing chain. Inside the CMP assembly is a wheel with fixed vanes that is attached to the camshafts. The CMP actuator assemblies are also equipped with a locking pin. The locking pin prevents movement between the outer housing and the wheel vane assembly on engine start-ups. The CMP actuator is locked until sufficient oil pressure is available to control the CMP actuator. The locking pin is released by oil pressure before any movement in the CMP actuator assembly takes place. If the ECM detects that the CMP actuator is not in the locked position on a start-up, this Diagnostic Trouble Code (DTC) sets.
What are the Possible Causes of the DTC P1011 GMC?
- Low engine oil level
- Low engine oil pressure
- Faulty Intake Camshaft Position Actuator Bank 1
How to Fix the DTC P1011 GMC?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1011 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1011 GMC code?
Need more information on how to fix the P1011 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1011 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1011 GMC Code
What does the OBDII code P1011 mean for a GMC vehicle?
P1011 indicates an issue with the Intake Camshaft Position Actuator not reaching its park position on Bank 1, which may affect engine timing and performance.
What are the common symptoms of code P1011 in a GMC?
Symptoms may include rough idling, reduced engine performance, poor fuel economy, illuminated check engine light, or difficulty starting the engine.
What causes the P1011 code to trigger?
Common causes include a faulty camshaft position actuator, low or dirty engine oil, a malfunctioning camshaft position sensor, or an issue with the wiring or connections in the actuator circuit.
How can low engine oil cause the P1011 code?
Low or dirty oil can restrict proper operation of the camshaft position actuator, which relies on hydraulic pressure to adjust timing.
How do you diagnose the P1011 code on a GMC?
Diagnosis typically involves checking the engine oil level and condition, inspecting wiring and connections, testing the camshaft position actuator, and using a scan tool to monitor camshaft position data.
Can driving with the P1011 code damage the engine?
Yes, prolonged driving with this code can lead to engine timing issues, which may cause severe engine damage if not addressed promptly.
How do you fix the P1011 code on a GMC?
Repairs may include replacing a faulty camshaft position actuator, cleaning or replacing the camshaft position sensor, fixing wiring issues, or performing an oil change with the correct oil type.
Is the P1011 code specific to GMC vehicles?
No, while it is common on GMC and GM vehicles, the code can appear on other makes and models that use similar camshaft position actuator systems.
How much does it typically cost to repair the P1011 code on a GMC?
Repair costs vary but may range between $150 and $500, depending on whether the issue is related to the actuator, sensor, or simply an oil change.
Can a camshaft position sensor cause the P1011 code?
Yes, a faulty camshaft position sensor can lead to inaccurate readings, which may trigger the P1011 code related to the actuator's position.
Discuss the causes and fixes for P1011 GMC OBDII Code
Code P1011 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
