P1009 2018 GMC Sierra Code - Fuel Pump Driver Control Module Temperature High Signal Message Counter Incorrect
Quick Answer
Control modules connected to the serial data circuits monitor the communication during normal vehicle operation. Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1009 2018 GMC Sierra indicates Fuel Pump Driver Control Module Temperature High Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1009 2018 GMC Sierra Description
What are the Possible Causes of the DTC P1009 2018 GMC Sierra?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
How to Fix the DTC P1009 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1009 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1009 2018 GMC Sierra code?
Need more information on how to fix the P1009 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1009 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1009 2018 GMC Sierra Code
What does the OBDII code P1009 mean on a 2018 GMC Sierra?
P1009 indicates an issue with the Fuel Pump Driver Control Module (FPCM), specifically a high signal temperature message counter that is incorrect or outside normal parameters.
What are the common symptoms of the P1009 code in a 2018 GMC Sierra?
Symptoms may include difficulty starting, reduced engine performance, erratic fuel pump operation, or the check engine light being illuminated.
What causes the P1009 code to appear in a 2018 GMC Sierra?
Common causes include a malfunctioning Fuel Pump Driver Control Module, poor electrical connections, damaged wiring, or a software issue in the FPCM.
Can I drive my 2018 GMC Sierra with the P1009 code?
Driving with this code is not recommended, as it may lead to fuel delivery issues and potential engine performance problems.
How do I diagnose the P1009 code on a 2018 GMC Sierra?
Diagnosis involves scanning for codes, inspecting the Fuel Pump Driver Control Module, checking for damaged wiring, and verifying the integrity of electrical connections.
What tools are needed to troubleshoot the P1009 code?
An OBDII scanner, a multimeter for checking voltage and continuity, and possibly wiring diagrams for the fuel pump control system are commonly used tools.
How is the P1009 code fixed on a 2018 GMC Sierra?
Repairs may involve replacing the Fuel Pump Driver Control Module, repairing or replacing damaged wiring, updating module software, or cleaning corroded connectors.
Is the P1009 code covered under warranty on a 2018 GMC Sierra?
It depends on the vehicle’s warranty status and coverage. Consult your GMC dealership or warranty documentation for details.
How much does it cost to repair the P1009 code in a 2018 GMC Sierra?
Repair costs vary, but replacing the Fuel Pump Driver Control Module can range from $300 to $800, including parts and labor, depending on the extent of the issue.
Can a software update fix the P1009 code on a 2018 GMC Sierra?
In some cases, a software update to the Fuel Pump Driver Control Module may resolve the issue if the problem is related to incorrect programming.
Discuss the causes and fixes for P1009 2018 GMC Sierra OBDII Code
Code P1009 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
