P1005 Chevrolet Code - Fuel Pump Driver Control Module Enable Too Many Resets
Quick Answer
The fuel pump driver control module sends a message every 100 ms to the Engine Control Module (ECM) that indicates the amount of time elapsed since the last controller reset (power up or running reset). Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1005 Chevrolet indicates Fuel Pump Driver Control Module Enable Too Many Resets.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1005 Chevrolet Description
What are the Possible Causes of the DTC P1005 Chevrolet?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
How to Fix the DTC P1005 Chevrolet?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1005 Chevrolet code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1005 Chevrolet code?
Need more information on how to fix the P1005 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1005 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- P1005 2014 Chevrolet Silverado — Fuel Pump Driver Control Module Enable Too Many Resets
- P1005 2015 Chevrolet Silverado — Fuel Pump Driver Control Module Enable Too Many Resets
- P1005 2016 Chevrolet Silverado — Fuel Pump Driver Control Module Enable Too Many Resets
- P1005 2017 Chevrolet Silverado — Fuel Pump Driver Control Module Enable Too Many Resets
- P1005 2018 Chevrolet Silverado — Fuel Pump Driver Control Module Enable Too Many Resets
Frequently Asked Questions about P1005 Chevrolet Code
1. What are the common symptoms of OBDII code P1005 on a Chevrolet related to the Fuel Pump Driver Control Module Enable Too Many Resets?
The common symptoms include stalling, difficulty starting the vehicle, reduced engine performance, and an illuminated check engine light.
2. What can cause the OBDII code P1005 on a Chevrolet indicating Fuel Pump Driver Control Module Enable Too Many Resets?
The code P1005 can be triggered by a faulty fuel pump driver control module, wiring issues, a defective fuel pump, or a software glitch in the vehicle's computer system.
3. How can I diagnose the OBDII code P1005 on my Chevrolet?
Diagnosing the code P1005 typically involves using a scan tool to retrieve the code, inspecting the fuel pump driver control module and related wiring, and testing the fuel pump's operation.
4. What are the possible repair options for fixing OBDII code P1005 on a Chevrolet?
Repair options may include replacing the fuel pump driver control module, repairing any damaged wiring, replacing the fuel pump if necessary, and updating the vehicle's software.
5. Can I drive my Chevrolet with the OBDII code P1005 present?
It is not recommended to drive your vehicle with the code P1005 present, as it can lead to potential fuel delivery issues and engine performance problems.
6. How much does it typically cost to repair OBDII code P1005 on a Chevrolet?
The cost of repairing the code P1005 can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
7. Is it possible to reset the OBDII code P1005 on a Chevrolet without making any repairs?
While clearing the code may temporarily turn off the check engine light, it is not recommended to reset the code without addressing the underlying issue, as it may lead to further problems down the line.
8. Are there any preventative measures I can take to avoid OBDII code P1005 on my Chevrolet?
Regular maintenance, such as checking the fuel pump driver control module and related components during tune-ups, can help prevent issues that may trigger the P1005 trouble code.
9. Can a DIY enthusiast repair OBDII code P1005 on a Chevrolet, or is it best left to professionals?
Depending on your skill level and access to tools, some DIY enthusiasts may be able to tackle the repairs related to the code P1005. However, complex diagnostics and repairs may be best left to automotive professionals.
10. How urgent is it to address OBDII code P1005 on a Chevrolet once it appears?
It is recommended to address the code P1005 as soon as possible to prevent potential fuel system failures, engine performance issues, and further damage to the vehicle.
Discuss the causes and fixes for P1005 Chevrolet OBDII Code
Code P1005 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
