P1005 2014 Chevrolet Silverado Code - Fuel Pump Driver Control Module Enable Too Many Resets
Quick Answer
The fuel pump driver control module sends a message every 100 ms to the Engine Control Module (ECM) that indicates the amount of time elapsed since the last controller reset (power up or running reset). Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1005 2014 Chevrolet Silverado indicates Fuel Pump Driver Control Module Enable Too Many Resets.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Fuel Pump Driver Control Module harness is open or shorted, Fuel Pump Driver Control Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P1005 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P1005 2014 Chevrolet Silverado?
- Faulty Fuel Pump Driver Control Module
- Fuel Pump Driver Control Module harness is open or shorted
- Fuel Pump Driver Control Module circuit poor electrical connection
How to Fix the DTC P1005 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P1005 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P1005 2014 Chevrolet Silverado code?
Need more information on how to fix the P1005 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1005 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1005 2014 Chevrolet Silverado Code
What does the P1005 code mean in a 2014 Chevrolet Silverado?
The P1005 code indicates that the Fuel Pump Driver Control Module has experienced too many resets, signaling a potential issue with the module or its communication system.
What are the common symptoms of the P1005 code?
Symptoms may include difficulty starting the vehicle, engine stalling, reduced performance, and the check engine light being illuminated.
What causes the P1005 code to appear?
Common causes include a faulty Fuel Pump Driver Control Module, wiring issues, poor electrical connections, or a software glitch in the module.
Can the P1005 code affect fuel delivery?
Yes, this code can disrupt proper fuel delivery, potentially causing poor engine performance or even preventing the engine from starting.
How can I diagnose the P1005 code?
Diagnosing involves using an OBDII scanner to confirm the code, inspecting the Fuel Pump Driver Control Module, checking wiring and connections, and performing voltage tests.
Is it safe to drive with the P1005 code?
Driving with this code may lead to engine performance issues or stalling, so it’s recommended to address the problem as soon as possible.
How do I fix the P1005 code?
Repairs may include replacing the Fuel Pump Driver Control Module, repairing damaged wiring, cleaning electrical connections, or updating the module’s software.
Does the P1005 code require professional assistance?
While some repairs like checking connections can be attempted by experienced DIYers, diagnosing or replacing the module may require professional help.
Can a weak battery cause the P1005 code?
Yes, a weak or failing battery can cause resets in the Fuel Pump Driver Control Module and trigger the P1005 code.
How much does it cost to fix the P1005 code?
Repair costs vary but may range from $200 to $600, depending on whether the module needs replacement or if it’s a wiring issue.
Discuss the causes and fixes for P1005 2014 Chevrolet Silverado OBDII Code
Code P1005 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
