P0986 2007 Toyota Camry Code - Shift Solenoid 'E' Control Circuit High Valve SR
Quick Answer
Shifting from 1st to 5th is performed in combination with â€ON†and â€OFF†operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which is controlled by the Engine Control Module (ECM). Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0986 2007 Toyota Camry indicates Shift Solenoid 'E' Control Circuit High Valve SR.
- Common causes
- Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0986 2007 Toyota Camry Description
What are the Possible Causes of the DTC P0986 2007 Toyota Camry?
- Dirty transmission fluid
- Low transmission fluid level
- Faulty pressure control solenoid valve SR
- Pressure control solenoid valve SR harness is open or shorted
- Pressure control solenoid valve SR circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0986 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0986 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0986 2007 Toyota Camry code?
Need more information on how to fix the P0986 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0986 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0986 2007 Toyota Camry Code
1. What does the OBDII code P0986 mean for a 2007 Toyota Camry?
P0986 indicates a problem in the Shift Solenoid 'E' control circuit, specifically that the circuit voltage is higher than expected.
2. What are the symptoms of code P0986 in a 2007 Toyota Camry?
Symptoms may include harsh or delayed shifting, being stuck in one gear, reduced fuel efficiency, and the Check Engine Light turning on.
3. What causes the P0986 code to appear in a 2007 Toyota Camry?
Common causes include a faulty shift solenoid 'E', damaged wiring or connectors in the solenoid circuit, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2007 Toyota Camry with the P0986 code?
Driving with this code is not recommended as it can lead to further transmission damage and poor drivability.
5. How do I diagnose the P0986 code on a 2007 Toyota Camry?
Diagnosis typically involves scanning the transmission system, inspecting the wiring and connectors for damage, and testing the shift solenoid 'E' for proper operation.
6. How is the P0986 code repaired on a 2007 Toyota Camry?
Repairs may include replacing the shift solenoid 'E', repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming/replacing the TCM.
7. How much does it cost to fix the P0986 code on a 2007 Toyota Camry?
Repair costs vary but may range from $150 to $400 for solenoid replacement and labor, depending on the shop and the extent of the issue.
8. Can a dirty transmission fluid cause the P0986 code?
Yes, dirty or contaminated transmission fluid can affect solenoid operation and lead to this code. A fluid flush may sometimes resolve the issue.
9. Where is the shift solenoid 'E' located on a 2007 Toyota Camry?
The shift solenoid 'E' is located inside the transmission, typically mounted to the valve body.
10. What tools are needed to troubleshoot the P0986 code on a 2007 Toyota Camry?
Common tools include an OBDII scanner, a multimeter for testing electrical circuits, and basic hand tools for accessing the solenoid.
Discuss the causes and fixes for P0986 2007 Toyota Camry OBDII Code
Code P0986 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
