P0985 2011 Toyota Camry Code - Shift Solenoid 'E' Control Circuit Low Valve SR
Quick Answer
Shifting from 1st to 5th is performed in combination with â€ON†and â€OFF†operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which is controlled by the Engine Control Module (ECM). Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0985 2011 Toyota Camry indicates Shift Solenoid 'E' Control Circuit Low Valve SR.
- Common causes
- Common causes include Dirty transmission fluid, Low transmission fluid level, Faulty pressure control solenoid valve SR.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0985 2011 Toyota Camry Description
What are the Possible Causes of the DTC P0985 2011 Toyota Camry?
- Dirty transmission fluid
- Low transmission fluid level
- Faulty pressure control solenoid valve SR
- Pressure control solenoid valve SR harness is open or shorted
- Pressure control solenoid valve SR circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0985 2011 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0985 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0985 2011 Toyota Camry code?
Need more information on how to fix the P0985 2011 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0985 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0985 2011 Toyota Camry Code
What does the OBDII code P0985 mean on a 2011 Toyota Camry?
P0985 indicates a problem with the Shift Solenoid 'E' Control Circuit, specifically that the circuit is experiencing low voltage or resistance.
What are common symptoms of the P0985 code?
Symptoms may include erratic shifting, being stuck in one gear, poor acceleration, reduced fuel efficiency, or the check engine light being illuminated.
What causes the P0985 code to appear?
Common causes include a faulty shift solenoid 'E', damaged or corroded wiring, a poor electrical connection, or a malfunctioning transmission control module (TCM).
How can I diagnose the P0985 code?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage, test the shift solenoid with a multimeter, and check the TCM for faults.
Can I drive my 2011 Toyota Camry with the P0985 code?
While the vehicle may still be drivable, driving with this code can cause further transmission damage and should be addressed as soon as possible.
How is the P0985 code fixed?
Repairs may include replacing the shift solenoid 'E', repairing or replacing damaged wiring, cleaning corroded connectors, or reprogramming or replacing the TCM.
What tools are needed to fix the P0985 code?
You may need an OBDII scanner, a multimeter, basic hand tools, and potentially access to a repair manual for your vehicle.
How much does it cost to repair the P0985 code?
Costs can vary, but replacing a shift solenoid typically costs $150–$400, plus labor. Wiring repairs or TCM replacement can increase costs.
Can low transmission fluid cause the P0985 code?
Yes, low or dirty transmission fluid can affect solenoid operation and may trigger the P0985 code. Check and replace the fluid if necessary.
Do I need to reset the code after repairs?
Yes, after completing repairs, use an OBDII scanner to clear the code and ensure it does not return.
Discuss the causes and fixes for P0985 2011 Toyota Camry OBDII Code
Code P0985 2011 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
