P0982 2007 Toyota Camry Code - Shift Solenoid 'D' Control Circuit Low Valve S4
Quick Answer
Shifting from 1st to 5th is performed in combination with “ON’ and “OFF operation of the shift solenoid valves SL1, SL2, SL3, S4 and SR which are controlled by the Engine Control Module (ECM). Common causes include Shift Solenoid Valve S4, Line pressure solenoid valve S4 harness is open or shorted, Line pressure solenoid valve S4 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0982 2007 Toyota Camry indicates Shift Solenoid 'D' Control Circuit Low Valve S4.
- Common causes
- Common causes include Shift Solenoid Valve S4, Line pressure solenoid valve S4 harness is open or shorted, Line pressure solenoid valve S4 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0982 2007 Toyota Camry Description
What are the Possible Causes of the DTC P0982 2007 Toyota Camry?
- Shift Solenoid Valve S4
- Line pressure solenoid valve S4 harness is open or shorted
- Line pressure solenoid valve S4 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0982 2007 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0982 2007 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0982 2007 Toyota Camry code?
Need more information on how to fix the P0982 2007 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0982 2007 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0982 2007 Toyota Camry Code
1. What does the OBDII code P0982 mean for a 2007 Toyota Camry?
P0982 refers to a problem in the Shift Solenoid 'D' Control Circuit (Valve S4), indicating the circuit is experiencing low voltage.
2. What are the common symptoms of P0982 in a 2007 Toyota Camry?
Symptoms may include harsh or delayed shifting, a stuck gear, transmission slipping, reduced fuel efficiency, or the Check Engine Light turning on.
3. What causes the P0982 code to appear in a 2007 Toyota Camry?
Common causes include a faulty shift solenoid, damaged wiring or connectors in the solenoid circuit, transmission fluid contamination, or a malfunctioning transmission control module (TCM).
4. How can I diagnose the P0982 code in my 2007 Toyota Camry?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors for damage or corrosion, and test the shift solenoid and circuit with a multimeter.
5. Can driving with the P0982 code damage my 2007 Toyota Camry?
Continuing to drive with this code can cause further damage to the transmission, so it’s best to address the issue promptly.
6. How do I fix the P0982 code on a 2007 Toyota Camry?
Repairs may involve replacing the faulty shift solenoid, repairing damaged wiring or connectors, cleaning the transmission fluid, or updating/replacing the TCM if needed.
7. How much does it cost to repair a P0982 code in a 2007 Toyota Camry?
The cost depends on the root cause, with solenoid replacement ranging from $150 to $400, and wiring repairs varying based on labor rates and severity.
8. Can low transmission fluid cause the P0982 code in a 2007 Toyota Camry?
Yes, low or contaminated transmission fluid can lead to improper solenoid operation and trigger the P0982 code.
9. Do I need to replace the transmission if my 2007 Toyota Camry has a P0982 code?
Not necessarily. Most cases involve repairing or replacing the solenoid or its circuit rather than replacing the entire transmission.
10. Can I reset the P0982 code without fixing the problem?
You can clear the code with an OBDII scanner, but if the issue isn’t resolved, the code will likely reappear, and the symptoms may persist.
Discuss the causes and fixes for P0982 2007 Toyota Camry OBDII Code
Code P0982 2007 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
