P0980 2014 Chevrolet Silverado Code - Shift Solenoid Valve 3 Control Circuit High Voltage
Quick Answer
The Transmission Control Module (TCM) high side driver 1 supplies 12 V to pressure control solenoid valve 3. Common causes include Faulty Shift Solenoid Valve 3, Shift Solenoid Valve 3 harness is open or shorted, Shift Solenoid Valve 3 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0980 2014 Chevrolet Silverado indicates Shift Solenoid Valve 3 Control Circuit High Voltage.
- Common causes
- Common causes include Faulty Shift Solenoid Valve 3, Shift Solenoid Valve 3 harness is open or shorted, Shift Solenoid Valve 3 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0980 2014 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0980 2014 Chevrolet Silverado?
- Faulty Shift Solenoid Valve 3
- Shift Solenoid Valve 3 harness is open or shorted
- Shift Solenoid Valve 3 circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0980 2014 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0980 2014 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0980 2014 Chevrolet Silverado code?
Need more information on how to fix the P0980 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0980 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0980 2014 Chevrolet Silverado Code
1. What does the OBDII code P0980 mean on a 2014 Chevrolet Silverado?
It indicates a high voltage issue in the Shift Solenoid Valve 3 Control Circuit, affecting the transmission's operation.
2. What are the common symptoms of the P0980 code in a 2014 Silverado?
Symptoms include harsh or delayed shifting, transmission stuck in one gear, or the check engine light being on.
3. What causes the P0980 code to appear?
Common causes include faulty shift solenoid, damaged wiring or connectors in the circuit, or a malfunctioning transmission control module (TCM).
4. Can I drive my 2014 Silverado with the P0980 code?
Driving is possible, but it’s not recommended because further damage to the transmission may occur if the issue isn’t addressed.
5. How do I diagnose the P0980 code on my Silverado?
Start by inspecting the wiring and connectors for damage, test the shift solenoid, and check for proper voltage at the TCM.
6. How can the P0980 code be fixed?
Repairs may involve replacing the faulty shift solenoid, repairing damaged wiring, or reprogramming or replacing the TCM.
7. How much does it cost to repair the P0980 code on a 2014 Silverado?
Costs vary but typically range from $150 to $400 for solenoid replacement, with additional costs for wiring or TCM issues.
8. Can a low transmission fluid level cause the P0980 code?
Indirectly, yes. Low fluid can affect solenoid performance, so it’s essential to check and maintain the proper fluid level.
9. Will clearing the P0980 code fix the issue permanently?
No, clearing the code only removes it temporarily. The underlying issue must be repaired to avoid the code reappearing.
10. Do I need a professional mechanic to fix the P0980 code?
While basic inspections can be done at home, diagnosing and repairing electrical or TCM issues often requires professional expertise.
Discuss the causes and fixes for P0980 2014 Chevrolet Silverado OBDII Code
Code P0980 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
