P0970 2018 GMC Sierra Code - Pressure Control Solenoid Valve 3 Control Circuit Low Voltage
Quick Answer
The pressure control solenoid 3 is part of the control solenoid valve assembly which has no serviceable parts. Common causes include Low transmission fluid, Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0970 2018 GMC Sierra indicates Pressure Control Solenoid Valve 3 Control Circuit Low Voltage.
- Common causes
- Common causes include Low transmission fluid, Faulty Control Solenoid Valve Assembly, Control Solenoid Valve Assembly harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0970 2018 GMC Sierra Description
The Diagnostic Trouble Code (DTC) will be set when the Transmission Control Module detects a short to ground on the pressure control solenoid 3 control circuit for 1 s.
What are the Possible Causes of the DTC P0970 2018 GMC Sierra?
- Low transmission fluid
- Faulty Control Solenoid Valve Assembly
- Control Solenoid Valve Assembly harness is open or shorted
- Control Solenoid Valve Assembly circuit poor electrical connection
How to Fix the DTC P0970 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0970 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0970 2018 GMC Sierra code?
Need more information on how to fix the P0970 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0970 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0970 2018 GMC Sierra Code
What does OBDII code P0970 mean for a 2018 GMC Sierra?
P0970 indicates a low voltage issue in the control circuit for Pressure Control Solenoid Valve 3, which helps regulate transmission fluid pressure.
What are common symptoms of P0970 in a 2018 GMC Sierra?
Symptoms may include harsh or delayed shifting, slipping gears, transmission overheating, or the check engine light being illuminated.
What causes P0970 on a 2018 GMC Sierra?
Common causes include wiring issues like damaged or corroded wires, a faulty pressure control solenoid, a defective transmission control module (TCM), or low transmission fluid levels.
Can driving with P0970 damage my GMC Sierra's transmission?
Yes, continued driving with this code may lead to transmission damage due to improper fluid pressure regulation and overheating.
How do I diagnose P0970 on a 2018 GMC Sierra?
Diagnosis typically involves inspecting the wiring and connectors for damage, testing the solenoid's resistance, and checking the transmission control module for faults.
Is P0970 related to low transmission fluid?
Low transmission fluid can contribute to P0970, as inadequate fluid pressure may affect solenoid operation.
How much does it cost to fix P0970 on a 2018 GMC Sierra?
Repair costs vary but may range from $200 to $600 for solenoid replacement, with higher costs for wiring repairs or TCM replacement.
Can a faulty pressure control solenoid cause P0970?
Yes, a defective solenoid can fail to regulate fluid pressure properly, triggering the low voltage code.
Do I need to reprogram the TCM if it’s replaced for P0970?
Yes, replacing the transmission control module often requires reprogramming to ensure compatibility with the vehicle.
What tools are needed to troubleshoot P0970 on a 2018 GMC Sierra?
You’ll need a diagnostic scanner, multimeter, and possibly specialty tools for accessing the transmission wiring or solenoid.
Discuss the causes and fixes for P0970 2018 GMC Sierra OBDII Code
Code P0970 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
