P0914 Code - Gear Shift Position Circuit
Quick Answer
Manual transmissions have a sensor mounted on the shift lever that tells the Powertrain Control Module (PCM) what gear the transmission is in. Common causes include Faulty Gear Shift Position Sensor, Gear Shift Position Sensor harness is open or shorted, Gear Shift Position Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0914 indicates Gear Shift Position Circuit.
- Common causes
- Common causes include Faulty Gear Shift Position Sensor, Gear Shift Position Sensor harness is open or shorted, Gear Shift Position Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0914 Description
What are the Possible Causes of the DTC P0914?
- Faulty Gear Shift Position Sensor
- Gear Shift Position Sensor harness is open or shorted
- Gear Shift Position Sensor circuit poor electrical connection
- Faulty Shift Lever Assembly
How to Fix the DTC P0914?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0914 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0914 code?
Need more information on how to fix the P0914 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0914 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0914 Dodge — Gear Shift Position Circuit
Frequently Asked Questions about P0914 Code
1. What are the common symptoms of OBDII code P0914 (Gear Shift Position Circuit)?
- Common symptoms include difficulty shifting gears, the gear indicator not matching the actual gear, and the vehicle not starting.
2. What are the possible causes of OBDII code P0914?
- Possible causes include a faulty gear shift position sensor, damaged wiring or connectors in the gear shift position circuit, or a malfunctioning transmission control module.
3. How can I diagnose OBDII code P0914?
- Diagnose the code by conducting a visual inspection of the gear shift position sensor and related wiring, using a multimeter to test for continuity and proper voltage levels, and checking the transmission control module for any faults.
4. Can I drive my vehicle with OBDII code P0914 active?
- It is not recommended to drive the vehicle with this code active, as it can lead to further transmission issues and potential safety hazards. It's best to address the problem promptly.
5. How can I repair OBDII code P0914?
- Repair options include replacing the gear shift position sensor, repairing or replacing damaged wiring or connectors, and resetting the transmission control module to clear the code.
6. Will OBDII code P0914 cause my vehicle to go into limp mode?
- Depending on the severity of the issue, the vehicle may go into limp mode to prevent further damage. This is a safety feature designed to protect the transmission.
7. Can a DIY enthusiast fix OBDII code P0914 at home?
- While some basic troubleshooting and repairs can be done at home, diagnosing and fixing complex transmission-related issues may require professional expertise and specialized tools.
8. How much does it typically cost to repair OBDII code P0914 at a mechanic or dealership?
- Repair costs can vary depending on the specific cause of the code and the labor rates of the service provider. Expect to pay anywhere from $200 to $500 for parts and labor.
9. Is it possible for OBDII code P0914 to reoccur after being repaired?
- If the root cause of the issue is not properly addressed during repairs, there is a possibility that the code may reoccur. It's crucial to ensure all related components are thoroughly inspected and repaired.
10. Will resetting the OBDII code P0914 clear the issue permanently?
- Simply resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the code. It's important to diagnose and repair the issue to prevent it from reoccurring.
Discuss the causes and fixes for P0914 OBDII Code
-
i have a 2004 ford f150 2door and having a problem that i dont even know what axactly it is but showed code 0914 gear shift position circuit
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
