P0873 2008 Toyota Camry Code - Transmission Fluid Pressure Sensor/Switch 'C' Circuit High
Quick Answer
The Automatic Transmission Fluid (ATF) pressure switch No. Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0873 2008 Toyota Camry indicates Transmission Fluid Pressure Sensor/Switch 'C' Circuit High.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0873 2008 Toyota Camry Description
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 ON is detected twice when any of the gears from 1st to 4th engages normally.
What are the Possible Causes of the DTC P0873 2008 Toyota Camry?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0873 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0873 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0873 2008 Toyota Camry code?
Need more information on how to fix the P0873 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0873 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0873 2008 Toyota Camry Code
1. What are the common symptoms of OBDII code P0873 in a 2008 Toyota Camry?
- Common symptoms include harsh shifting, transmission slippage, decreased fuel efficiency, and the transmission going into limp mode.
2. What does the OBDII code P0873 on a 2008 Toyota Camry indicate?
- This code indicates a problem with the Transmission Fluid Pressure Sensor/Switch 'C' Circuit High, meaning there is a high voltage signal detected.
3. What are the possible causes of OBDII code P0873 in a 2008 Toyota Camry?
- Possible causes include a faulty transmission fluid pressure sensor/switch, wiring issues, a malfunctioning transmission control module (TCM), or low transmission fluid levels.
4. How can I diagnose the issue causing OBDII code P0873 in my 2008 Toyota Camry?
- Diagnosis involves using a scan tool to check for the code, inspecting the wiring and connectors for any damage, testing the transmission fluid pressure sensor, and checking the transmission fluid level.
5. Can I still drive my 2008 Toyota Camry with OBDII code P0873?
- It is not recommended to drive the vehicle with this code, as it can lead to further damage to the transmission. It's best to address the issue promptly.
6. How can I repair OBDII code P0873 in my 2008 Toyota Camry?
- Repair options include replacing the transmission fluid pressure sensor/switch, repairing any damaged wiring or connectors, resetting the TCM, and ensuring proper transmission fluid levels.
7. Will resetting the OBDII code P0873 in my 2008 Toyota Camry make it go away permanently?
- Resetting the code without addressing the underlying issue will not make it go away permanently. The root cause of the problem must be diagnosed and repaired.
8. Can a DIY enthusiast fix OBDII code P0873 in a 2008 Toyota Camry?
- Depending on their skill level, a DIY enthusiast may be able to address this issue by following repair guides and using the necessary tools. However, professional help is recommended for complex transmission issues.
9. How much does it cost to repair OBDII code P0873 in a 2008 Toyota Camry?
- The cost of repair can vary depending on the exact cause of the issue, parts needed, and labor rates. It is advisable to obtain quotes from reputable mechanics or dealerships.
10. What happens if OBDII code P0873 in a 2008 Toyota Camry is left untreated?
- Leaving this code untreated can lead to further transmission damage, increased repair costs, and potentially unsafe driving conditions. It's important to address the issue promptly.
Discuss the causes and fixes for P0873 2008 Toyota Camry OBDII Code
Code P0873 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
