P0872 2010 Toyota Camry Code - Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low
Quick Answer
The Automatic Transmission Fluid (ATF) pressure switch No. Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0872 2010 Toyota Camry indicates Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0872 2010 Toyota Camry Description
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 OFF is detected twice when any of the gears from 1st to 4th engages normally.
What are the Possible Causes of the DTC P0872 2010 Toyota Camry?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0872 2010 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0872 2010 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0872 2010 Toyota Camry code?
Need more information on how to fix the P0872 2010 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0872 2010 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0872 2010 Toyota Camry Code
1. What are the common symptoms of OBDII code P0872 in a 2010 Toyota Camry?
The common symptoms include harsh shifting, transmission slippage, and illuminated warning lights on the dashboard.
2. What causes the Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low error code in a 2010 Toyota Camry?
The P0872 code is typically triggered by a faulty transmission fluid pressure sensor/switch, damaged wiring or connectors, low transmission fluid levels, or a malfunctioning transmission control module.
3. How can I diagnose the P0872 code in my 2010 Toyota Camry?
Diagnosing the P0872 code involves using a scan tool to retrieve the code, inspecting the transmission fluid level and condition, checking the wiring and connectors for damage, and testing the transmission fluid pressure sensor/switch for proper operation.
4. Can I continue driving my 2010 Toyota Camry with the P0872 code present?
It is not recommended to drive the vehicle with the P0872 code active, as it can lead to further damage to the transmission and potentially unsafe driving conditions.
5. How can I repair the Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low issue in my 2010 Toyota Camry?
Repairing the P0872 code may involve replacing the transmission fluid pressure sensor/switch, repairing or replacing damaged wiring or connectors, topping up the transmission fluid, or resetting the transmission control module.
6. Is it safe to reset the OBDII code P0872 in a 2010 Toyota Camry without fixing the underlying issue?
Resetting the code without addressing the root cause may temporarily turn off the warning light, but the issue will likely reoccur, leading to potential transmission problems.
7. How much does it typically cost to repair the P0872 code in a 2010 Toyota Camry?
The cost of repairing the P0872 code can vary depending on the specific cause of the issue, but it may range from $200 to $500 for parts and labor.
8. Can a DIY enthusiast fix the P0872 code in a 2010 Toyota Camry?
While some aspects of diagnosing and repairing the P0872 code can be tackled by DIY enthusiasts, working on the transmission system may require specialized tools and expertise, so professional assistance is recommended.
9. Will driving with the P0872 code damage the transmission of my 2010 Toyota Camry?
Continued driving with the P0872 code can potentially cause damage to the transmission over time, leading to more severe and costly repairs.
10. How often should I check my transmission fluid levels in a 2010 Toyota Camry to prevent the P0872 code?
It is recommended to check the transmission fluid levels regularly as part of routine maintenance, typically every 30,000 miles or as advised in the vehicle's owner's manual to help prevent issues like the P0872 code.
Discuss the causes and fixes for P0872 2010 Toyota Camry OBDII Code
Code P0872 2010 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
