P0872 2008 Toyota Camry Code - Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low
Quick Answer
The Automatic Transmission Fluid (ATF) pressure switch No. Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0872 2008 Toyota Camry indicates Transmission Fluid Pressure Sensor/Switch 'C' Circuit Low.
- Common causes
- Common causes include Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly, ATF Temperature Sensor harness is open or shorted, ATF Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0872 2008 Toyota Camry Description
The Diagnostic Trouble Code (DTC) will set if the ATF pressure switch No. 1 OFF is detected twice when any of the gears from 1st to 4th engages normally.
What are the Possible Causes of the DTC P0872 2008 Toyota Camry?
- Faulty Automatic Transmission Fluid (ATF) Temperature Sensor Assembly
- ATF Temperature Sensor harness is open or shorted
- ATF Temperature Sensor circuit poor electrical connection
- Faulty Transmission Control Module (TCM)
How to Fix the DTC P0872 2008 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0872 2008 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0872 2008 Toyota Camry code?
Need more information on how to fix the P0872 2008 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0872 2008 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0872 2008 Toyota Camry Code
What does the OBDII code P0872 mean on a 2008 Toyota Camry?
P0872 indicates a problem with the Transmission Fluid Pressure Sensor/Switch 'C' Circuit, specifically that it is reporting a low voltage or pressure reading.
What are the common symptoms of code P0872 on a 2008 Toyota Camry?
Symptoms may include harsh or erratic shifting, transmission slipping, poor acceleration, and the Check Engine Light being illuminated.
What causes the P0872 code in a 2008 Toyota Camry?
Common causes include a faulty transmission fluid pressure sensor, damaged wiring or connectors in the circuit, low or contaminated transmission fluid, or internal transmission issues.
Can driving with the P0872 code damage my car?
Yes, continuing to drive with this code can cause further damage to the transmission, especially if it leads to improper shifting or overheating.
How do I diagnose code P0872 on a 2008 Toyota Camry?
Diagnosis involves inspecting the transmission fluid level and condition, checking the wiring and connectors in the sensor circuit, and testing the transmission fluid pressure sensor for proper function.
Is a faulty transmission fluid pressure sensor common for the P0872 code?
Yes, a malfunctioning transmission fluid pressure sensor is a typical cause of this code and should be tested as part of the diagnostic process.
Can low transmission fluid trigger the P0872 code?
Yes, low or contaminated transmission fluid can cause incorrect pressure readings, triggering the P0872 code.
How much does it cost to fix the P0872 code on a 2008 Toyota Camry?
Repair costs vary depending on the issue, ranging from $100–$300 for sensor replacement to more if internal transmission repairs are needed.
Can I fix the P0872 code myself on a 2008 Toyota Camry?
If you're comfortable with basic diagnostics, you can check the transmission fluid level and inspect wiring. However, sensor replacement or internal transmission repairs may require professional assistance.
What tools are needed to troubleshoot code P0872?
You'll need an OBDII scanner, a multimeter for electrical testing, and possibly a transmission pressure gauge for in-depth diagnostics.
Discuss the causes and fixes for P0872 2008 Toyota Camry OBDII Code
Code P0872 2008 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
