AutoCodes – GMC – P0847 GMC

P0847 GMC Code - Transmission Fluid Pressure Switch 2 Circuit Low Voltage

Quick Answer

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve Assembly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0847 GMC indicates Transmission Fluid Pressure Switch 2 Circuit Low Voltage.
Common causes: Common causes include Low transmission fluid level, Dirty transmission fluid, Faulty Transmission Control Solenoid Valve Assembly.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 470

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Aug 02, 2022

Description
Possible Causes
How To Fix
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0847 GMC Description

The transmission fluid pressure switch, also known as the pressure switch manifold, is a multiple switch assembly made up of 3 normally open pressure switches and 1 normally closed pressure switch. Pressure switch 1 monitors shift valve 1 positioning, pressure switch 2 monitors shift valve 2 positioning, pressure switch 3 monitors shift valve 3 positioning, and pressure switch 4 monitors the position of the manual selector valve. The TCM provides a signal circuit to each of the pressure switches. The TCM constantly monitors the circuits to determine the position of the shift valves. The position of shift valves 1, 2, and 3 is controlled by 3 normally closed shift solenoids. When energized, shift solenoid 1 directs fluid pressure to shift valve 1, shift solenoid 2 directs fluid pressure to shift valve 2, and shift solenoid 3 directs fluid pressure to shift valve 3, which strokes the shift valves. When a shift valve is stroked, an exhaust passage is blocked and fluid pressure increases, closing the normally open pressure switch. The Diagnostic Trouble Code (DTC) will be set when the TCM detects that pressure switch 2 is Low when shift solenoid valve 2 is commanded OFF for 1 s.

OBDII Code P0847 GMC - Transmission Fluid Pressure Switch 2 Circuit Low Voltage - AutoCodes.com — P0847 GMC Code - Transmission Fluid Pressure Switch 2 Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0847 GMC?

Low transmission fluid level
Dirty transmission fluid
Faulty Transmission Control Solenoid Valve Assembly
Transmission Control Solenoid Valve Assembly harness is open or shorted
Transmission Control Solenoid Valve Assembly circuit poor electrical connection
Faulty Transmission Control Module (TCM)

How to Fix the DTC P0847 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0847 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0847 GMC code?

Need more information on how to fix the P0847 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0847 GMC code diagnosed by a professional: Find a repair shop in your area

Information for Specific GMC Models

P0847 2014 GMC Sierra — Transmission Fluid Pressure Switch 2 Circuit Low Voltage
P0847 2015 GMC Sierra — Transmission Fluid Pressure Switch 2 Circuit Low Voltage
P0847 2016 GMC Sierra — Transmission Fluid Pressure Switch 2 Circuit Low Voltage
P0847 2017 GMC Sierra — Transmission Fluid Pressure Switch 2 Circuit Low Voltage
P0847 2018 GMC Sierra — Transmission Fluid Pressure Switch 2 Circuit Low Voltage

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.