P0833 Code - Clutch Pedal Switch 'B' Circuit
Quick Answer
The Powertrain Control Module (PCM) monitors the Clutch Pedal Switch. Common causes include Faulty Clutch Pedal Switch 'B', Clutch Pedal Switch 'B' harness is open or shorted, Clutch Pedal Switch 'B' circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0833 indicates Clutch Pedal Switch 'B' Circuit.
- Common causes
- Common causes include Faulty Clutch Pedal Switch 'B', Clutch Pedal Switch 'B' harness is open or shorted, Clutch Pedal Switch 'B' circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0833 Description
What are the Possible Causes of the DTC P0833?
- Faulty Clutch Pedal Switch 'B'
- Clutch Pedal Switch 'B' harness is open or shorted
- Clutch Pedal Switch 'B' circuit poor electrical connection
How to Fix the DTC P0833?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0833 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0833 code?
Need more information on how to fix the P0833 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0833 code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- P0833 Buick — Clutch Pedal Switch 'B' Circuit
- P0833 Cadillac — Clutch Pedal Switch 'B' Circuit
- P0833 Chevrolet — Clutch Pedal Switch 'B' Circuit
- P0833 Chrysler — Clutch Pedal Switch 'B' Circuit
- P0833 Dodge — Clutch Pedal Switch 'B' Circuit
- P0833 Ford — Clutch Pedal Switch 'B' Circuit
- P0833 GMC — Clutch Pedal Switch 'B' Circuit
- P0833 Jeep — Clutch Pedal Switch 'B' Circuit
- P0833 Lincoln — Clutch Pedal Switch 'B' Circuit
- P0833 Mercedes-Benz — Clutch Pedal Switch 'B' Circuit
- P0833 Mercury — Clutch Pedal Switch 'B' Circuit
- P0833 Pontiac — Clutch Pedal Switch 'B' Circuit
- P0833 Saturn — Clutch Pedal Switch 'B' Circuit
Frequently Asked Questions about P0833 Code
What does code P0833 mean?
Code P0833 indicates an issue with the Clutch Pedal Switch 'B' Circuit, which monitors the clutch pedal's position to enable proper engine and transmission operation.
What are the common symptoms of code P0833?
Symptoms include difficulty starting the engine, inability to shift gears properly, reduced fuel efficiency, and possibly the illumination of the Check Engine Light.
What causes code P0833?
Common causes include a faulty clutch pedal position switch, damaged wiring or connectors, or electrical short circuits in the clutch pedal switch 'B' circuit.
Can code P0833 affect vehicle drivability?
Yes, it can cause issues with starting the engine or shifting gears, especially in manual transmission vehicles.
How is code P0833 diagnosed?
A mechanic will use an OBD-II scanner to confirm the code, inspect the clutch pedal switch, check for damaged wiring, and test the circuit for proper voltage and continuity.
Can I drive my car with code P0833?
While it may be possible to drive, issues like starting difficulties or gear shifting problems could worsen over time, so prompt repair is recommended.
How do you fix code P0833?
Repairs may involve replacing the clutch pedal position switch, repairing damaged wiring, or cleaning corroded electrical connectors.
How much does it cost to fix code P0833?
The repair cost can vary, but replacing a clutch pedal position switch typically ranges between $100 and $300, depending on labor and parts.
Can a dirty clutch pedal switch cause code P0833?
Yes, dirt or debris can interfere with the switch's operation, causing incorrect signals to the vehicle's computer.
Is code P0833 specific to manual transmission vehicles?
Yes, it primarily occurs in vehicles with manual transmissions that use a clutch pedal position switch for operation.
Discuss the causes and fixes for P0833 OBDII Code
Code P0833 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
