AutoCodes – Dodge – P0827 Dodge

P0827 Dodge Code - Up and Down Shift Switch Circuit Low

Quick Answer

The Transmission Control Module (TCM) monitors the Up and Down Shift Switch signal. Common causes include Faulty Up and Down Shift Switch, Up and Down Shift Switch harness is open or shorted, Up and Down Shift Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0827 Dodge indicates Up and Down Shift Switch Circuit Low.
Common causes: Common causes include Faulty Up and Down Shift Switch, Up and Down Shift Switch harness is open or shorted, Up and Down Shift Switch circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,361

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 09, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0827 Dodge Description

The Transmission Control Module (TCM) monitors the Up and Down Shift Switch signal. The TCM sets the OBDII code when the Up and Down Shift Switch is not to factory specifications.

OBDII Code P0827 Dodge - Up and Down Shift Switch Circuit Low - AutoCodes.com — P0827 Dodge Code - Up and Down Shift Switch Circuit Low

What does this mean?

What are the Possible Causes of the DTC P0827 Dodge?

Faulty Up and Down Shift Switch
Up and Down Shift Switch harness is open or shorted
Up and Down Shift Switch circuit poor electrical connection

How to Fix the DTC P0827 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0827 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0827 Dodge code?

Need more information on how to fix the P0827 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0827 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0827 Dodge Code

1. What are the common symptoms of OBDII code P0827 in a Dodge vehicle?

- Common symptoms include issues with shifting gears, difficulty engaging or disengaging gears, and the transmission not responding properly.

2. What are the potential causes of OBDII code P0827 in a Dodge vehicle?

- The code P0827 is usually triggered by a faulty up and down shift switch, damaged wiring or connectors in the shift switch circuit, or a defective transmission control module (TCM).

3. How can I diagnose OBDII code P0827 in my Dodge vehicle?

- To diagnose OBDII code P0827, you can use a diagnostic scanner to read the code and pinpoint the specific issue with the up and down shift switch or related circuit components.

4. Can I continue driving my Dodge with OBDII code P0827 present?

- It is not recommended to continue driving your Dodge with OBDII code P0827 present, as it can lead to further transmission damage and safety risks.

5. How can I repair OBDII code P0827 in my Dodge?

- Repair options include replacing the faulty up and down shift switch, repairing damaged wiring or connectors, or replacing the transmission control module if necessary.

6. Are there any DIY tips for fixing OBDII code P0827 in a Dodge?

- DIY enthusiasts can attempt to replace the up and down shift switch themselves, following a repair manual or online guides specific to their Dodge model.

7. How much does it typically cost to repair OBDII code P0827 in a Dodge?

- The repair cost can vary depending on the exact cause of the code and whether you choose to do the repair yourself or take your vehicle to a professional mechanic. Costs may range from a few hundred to over a thousand dollars.

8. Can a loose or disconnected battery cause OBDII code P0827 in a Dodge?

- A loose or disconnected battery can sometimes cause temporary issues with the transmission control module, which may trigger code P0827. Ensure the battery is securely connected before diagnosing further.

9. Will resetting the OBDII code P0827 in my Dodge make it go away permanently?

- Resetting the code may temporarily turn off the check engine light, but if the underlying issue causing P0827 is not addressed, the code is likely to return.

10. Is it necessary to visit a dealership for repairs related to OBDII code P0827 in a Dodge?

- While a dealership can provide specialized expertise, independent mechanics with experience in Dodge vehicles can also effectively diagnose and repair issues related to code P0827.